LamboClone - The Premier Site for Lamborghini Replica Builders

The Forum => Lessons Learned - Advice to Newbies => Topic started by: notnilc20 on August 17, 2012, 11:55:56 PM

Title: Has anyone else tried this Polyurethane adhesive?
Post by: notnilc20 on August 17, 2012, 11:55:56 PM

Don't want to open your big tube of Polyurethane adhesive b/c it'll dry up on you in a short time and you don't need a whole lot?  This is a very good polyurethane adhesive that you can use that comes in a smaller tube than the ones at the automotive stores. 

I found it at Wal-mart in the sport and marine section.  It's about $7 for this tube and works awesome! 

Just passing it along in case there are some like me who hate to open the big tubes to do a small job and end up wasting a lot.  This will dry up at the tip after 24 hours also, but you can cut the tube at the bottom and use the rest for later.   ::usa

Title: Re: Has anyone else tried this Polyurethane adhesive?
Post by: No Bull on August 18, 2012, 04:35:49 AM

Thanks for passing on the tip.   ::thumbup

Chris