LamboClone - The Premier Site for Lamborghini Replica Builders
How To - Tips => Electrical => Topic started by: No Bull on March 31, 2012, 03:04:08 PM
-
Attached are some electrical diagrams for wiring up a pair of OEM LP640 tail lights using a Fiero harness.
Chris
-
Attached are some electrical diagrams for wiring up a pair of OEM LP640 tail lights using a Fiero harness.
Chris
Any body have the diagrams for this
Thanks! SM
-
I had them at some point when Chris had the site but might have gotten lost when we lost a some media during the changeover. I'll look or you might do a little looking around on the site
-
Here is the fiero wire diagram
RH & LH Marker lights = Brown w/black ground
RH & LH Tail Light = Brown w/black ground
RH Turn Signal = Dark Green w/ black ground w/Brown for Tail Light
LH Turn Signal = Yellow w/ black ground w/Brown for Tail Light
Back Up Lamps = Light Green w/Black ground
License Lights = Brown w/Black ground
I'll keep looking for the LP640 diagram
-
Here is the fiero wire diagram
RH & LH Marker lights = Brown w/black ground
RH & LH Tail Light = Brown w/black ground
RH Turn Signal = Dark Green w/ black ground w/Brown for Tail Light
LH Turn Signal = Yellow w/ black ground w/Brown for Tail Light
Back Up Lamps = Light Green w/Black ground
License Lights = Brown w/Black ground
I'll keep looking for the LP640 diagram
Thanks !!!
I had the diagram a while back, but have misplaced it. ::scratch
My rear wiring is a hodge podge of various colors crimped on to the fiero set up. Going to cut back to stock fiero, and start over, circuit by circuit. i like using the colors on the fiero schematic, easier to trouble shoot
This No Bull diagram will be helpful to me.
-
Keep in mind that the Fiero wiring utilizes the brake and turn signal on both the RH and LH circuit. With the LP640 the brake light circuit must not connect through the turn signal switch. The LH & RH brake lights are wired to each other and connect at the brake light switch. The two rear turn signal lights will need to connect to the front turn signal wires that come out of the steering column. Six circuits: brake lights, tail lights, RH turn signal lights, LH turn signal lights, reverse lights, and fog lights. (This is also required on the Diablo when using the amber lights for the turn signals in the rear) Let me simplify that.............who's on first and I don't know is on second.....
01
-
Enjoy! :LL:
-
Enjoy! :LL:
::) :LL: