LamboClone - The Premier Site for Lamborghini Replica Builders
How To - Tips => Exhaust => Topic started by: tonypaul on March 12, 2013, 10:16:18 PM
-
Im almost ready to swap out my sbc/5 speed with my LS4/4t65ehd. The sbc is still in my Diablo and Im still going to be driving it until I have everything completly ready to swap. I figuring it will take only take me 2 days to do the swap. Im just waiting for my Microsquirt to come back from getting another board put in, I had a little accident with it. Other than that everything is ready, I got my trans controller installed with paddle shifters, the LS4 is done, axles are done, and have everything ready except exhaust.
I still have the factory exhaust manifolds on the LS4, with the factory crossover pipe that feeds into the rear exhaust manifold. So from here Im not sure what I want to do, should I "Y" off the rear manifold and run 2 seperate mufflers or run into a single in / dual out muffler? And the big question- would a Diablo Roadster look wierd with 2 exhaust tips coming out together or should I stay with the factory Diablo look with 2 dual out tips seperated?
Please forgive my super quick photoshop diagram, but hopefully you will understand what Im asking:
like this:
-
Im not sure if something like this would look good on a Diablo run as a single:
-
or even a worse photoshop example:
-
Im not sure if something like this would look good on a Diablo run as a single:
That is the same muffler that I am going to use although I am headed for the GTR look with the muffler mounted on an upward angle. I'm going to have to cut off the tips and rotate them 180ยบ. I don't like the third option. My $0.02 Jim
-
Tony cant wait to see and hear how everything works out! Im in for the easiest and best looking option and that would be #2 picture