How To - Tips > Steering / Suspension

Are corvette upgrade kits compatible with Fiero?

(1/3) > >>

jb1:
 I know this is an old topic but, I have read that some of the  4th gen (97-02)  camaro owners are  doing the   cts v swap and are direct bolt on with custom brake hose. I  have the  LS camaro calipers on my car, so the CTS V 4 piston calipers and  c6 z06 will bolt on but the  clearance is tight with my 13" c4hd  rotors and Ls Camaro calipers...
 The brackets should be same and if I ever find a good deal on used cts v calipers and z06 rotors I might just try that swap.
 The corvette c5 abutment brackets are different from the camaro so not sure the c5  adapters would work or not...
I  could have some more brackets cut if someone else wants to  try the swap
here is link with pic of the brakes

usmc_butler:
Get a hold of Eric At KitCarChassis.com his email is aechassis@hotmail.com might also be a phone number on the site. He can make the rings and adapters for the calipers. He will be the cheapest around and good quality parts. He is located in Dallas. Tell him you heard about him on this forum so maybe he will get over here!


Dustin

Onewickedsvt:
This is awesome.

Anyone have any part # or further purchase info for big calipers and brakes? Such as center ring, etc.

I am looking to attack this prior to body attachment just because of the space available.

Thanks guys!

autopro:
They come with some epoxy and you just glue them to your callipers.  You can also use some high-temp silicone.

usmc_butler:

--- Quote from: 01Lambiero on August 07, 2012, 10:20:44 AM --- Hey, usmc_butler,  Now get a set of the Brembo covers and it will put icing on your cake.

Jim

--- End quote ---

Agreed! How do they mount?

Navigation

[0] Message Index

[#] Next page