Author Topic: Chassis Works Ventador  (Read 4783 times)

fabnut

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Liked: 0
  • Member Rating Points: +0/-0
Re: Chassis Works Ventador
« Reply #5 on: February 18, 2018, 03:50:43 PM »
Wondering how close the Naerc plans are to the Chassis works.?  I see ebay guys still have the Naerc plans

italianknightrider

  • IKR
  • Trade Count: (+7)
  • Hero Member
  • *****
  • Posts: 653
  • Liked: 79
  • Member Rating Points: +36/-2
  • LAMBOCLONE MAFIA - Administrator / Owner
Re: Chassis Works Ventador
« Reply #4 on: January 27, 2017, 10:42:17 AM »
PM sent ,check your forum inbox
We hope our post help someone finish their build or get them interested in our hobby and start a build.

elvis05

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Liked: 0
  • Member Rating Points: +0/-0
Re: Chassis Works Ventador
« Reply #3 on: January 26, 2017, 11:01:45 PM »

I want to know if you have the plans so that a person can build it, and if you know how to build it as I can get in touch with you

italianknightrider

  • IKR
  • Trade Count: (+7)
  • Hero Member
  • *****
  • Posts: 653
  • Liked: 79
  • Member Rating Points: +36/-2
  • LAMBOCLONE MAFIA - Administrator / Owner
Re: Chassis Works Ventador
« Reply #2 on: September 23, 2015, 10:34:24 PM »


this CW frame is under the car below ,we have finished modifying the CW plans with some simple hand drawings as to what our plans are to fit this CHASSIS under the Ventador & Veneno body kits. all the front and rear suspension points will stay the same , the rear is good but the front will require a custom size rim with a little extra lip to compensate for the track width going from Murcie (narrower) to Ventador (wider)

https://www.youtube.com/watch?v=rtUfxrwopwI&NR=1
https://www.youtube.com/watch?v=XWtRMsjTAk0
https://www.youtube.com/watch?v=tUBx6BfMCRo



http://lamboclone.com/index.php?topic=2155.0
« Last Edit: January 27, 2017, 01:37:57 AM by italianknightrider »
We hope our post help someone finish their build or get them interested in our hobby and start a build.

italianknightrider

  • IKR
  • Trade Count: (+7)
  • Hero Member
  • *****
  • Posts: 653
  • Liked: 79
  • Member Rating Points: +36/-2
  • LAMBOCLONE MAFIA - Administrator / Owner
Chassis Works Ventador
« Reply #1 on: September 17, 2015, 12:38:45 PM »
i think the cabin of the CW plans could be altered by 3" longer inside the cab ,along with some widening across the foot pedal box area ,so the firewall and front are equal across ,then the front and rear sections for suspension could stay the same and use custom offset rims with tires

VENTADOR
DIMENSIONS

Wheelbase:2,700 mm (106.30 in)
Overall length:4,780 mm (188.19 in)
Overall width (excluding mirrors):2,030 mm (79.92 in)
Overall width (including mirrors):2,265 mm (89.17 in)
Overall height:1,136 mm (44.72 in)
Front track:1,720 mm (67.72 in)
Rear track:1,700 mm (66.93 in)
Dry weight:1,575 kg (3,472 lb)
Weight/Power ratio:2.25 kg/CV (4.96 lb/CV)
Weight distribution (front - rear):43 % - 57 %



MERCI frame

Wheelbase : 2665 mm (104.9 in) or ( 10.5" ) stretch fiero

Overall length : 4580 mm (180.3 in)

Overall width : 2045 mm 80.5 in)

Overall height : 1135 mm (44.7 in)

Front track : 1635 mm (64.4 in)

Rear track : 1695 mm (66.7 in)

Ground clear. : 135 mm (5.5 in)
« Last Edit: September 19, 2015, 01:49:30 PM by italianknightrider »
We hope our post help someone finish their build or get them interested in our hobby and start a build.