Rewire my 86 Fiero?? Have a Question or two

[minihawn]

thank you.

[Tusabes]

If your wiring currently works and you're not swapping motor or gauges there is zero reason to change out the wiring.

[minihawn]

Since I'm keeping the Fiero motor would you recommend I do not do the wires why? And was it pretty simple to put in?

[minihawn]

When I built my car I ripped out eery single Fiero wire that was in the car. Got a 21 circuit universal GM wiring harness off Ebay and rewired the whole car. But I was doing a motor swap, putting in VDO replica Lambo gauges, my own power window motors,ect so it made more sense to replace everything to me.

Since I'm keeping the Fiero motor would you recommend I do not do the wires why? And was it pretty simple to put in?

[minihawn]

Looks awesome!!

Thank u, so since I'm planning on leaving in my fiero would u suggest I leave the wiring in or replace it all?

[tonypaul]

When I built my car I ripped out eery single Fiero wire that was in the car. Got a 21 circuit universal GM wiring harness off Ebay and rewired the whole car. But I was doing a motor swap, putting in VDO replica Lambo gauges, my own power window motors,ect so it made more sense to replace everything to me.

[minihawn]

Looks awesome!!

[minihawn]

I sure will , thank u

[faker]

I personally have been going back and forth with idea of doing what this guy did, he used a 04 grand prix gtp wiring from a salvaged gtp and the dash supposedly fits like a charm, if you read his build it looks great and it saves you cash, if you swap the gtp 3800sc motor from a 04 in your build useing the wiring from the gtp dash and gauge cluster majes everything plug in play, no splicing into wiring etc, i spoke with him and he claims that it wasn't that hard, check it out.

[url=http://www.fiero.nl/forum/Forum2/HTML/125870.html]http://www.fiero.nl/forum/Forum2/HTML/125870.html[/url]

[minihawn]

I'm thinking about "rewiring" my 86 fiero , to a more modern wiring harness/fuse/ relay system , not really sure where to begin,. My car runs drives /stops as of right now and the wiring is functional . Any insight on a universal wiring package of sorts, hopefully something "painless" or a plug and play if possible. Thanks guys