How To - Tips > Doors

Door problems...

(1/3) > >>

ActiveLife:
Melvin,
Those additional pictures do tell more of the story of what you're dealing with.  Considering all of the pictures I've seen and every different way that I would personally fix this issue if this were my car, I can say with certainty that the door(s) can be saved...

I would be more than happy to write out my considerations, but I remember you've mentioned that you are not a body craftsman, and from what I see, some of the techniques required to execute this repair would demand a particular skill set. 

Have you consulted with any auto body specialists near you or are you trying to gain as much knowledge before hand so you have a plan in mind when you're ready to completely fix the issue?

-Active

rodrieguz:
Looking at your most recent pics now, those doors need to be cut apart and re-done  to fit the car.  if there is steel frame  along that upper section, you won't  be  able to move it without some serious  door surgery.   it will definitely  be easier  for your to purchase  a new set of doors and start over.   that's  option 1

option 2 would be to remove the doors and cut them apart.  once cut apart  (you'll  have alot of cleaning up to do) then bolt back on the inner door so you can see where you need to cut, bend, glass the door to fit the car.

MBFDIABLO:
Well Check these foto s Maybe Some help...

MBFDIABLO:
Thanx ill Check iT!

lambo_sam:
Hiya, Here is one of my favorite videos on how to fix that

https://www.youtube.com/watch?v=wnZ6fBdPlbI&index=62&list=LLMF6CjTOKvAFF4zjl8hTG4w

Navigation

[0] Message Index

[#] Next page