Author Topic: Need Help!  (Read 1246 times)

Simple Man

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 292
  • Member Rating Points: +11/-0
Re: Need Help!
« Reply #6 on: November 13, 2017, 05:56:42 PM »
I didn't really want to start pulling it apart until I had the parts.
I can probably get a shot of the half shaft tomorrow.
Thanks.

5 Lug nuts, take the tire off, take a picture of the rear, or jack the car up, take a picture.

then post pictures and some one who knows, can tell you what you have.   ::salute
« Last Edit: November 13, 2017, 05:58:20 PM by Simple Man »

Ccemn1

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 91
  • Member Rating Points: +0/-0
Re: Need Help!
« Reply #5 on: November 13, 2017, 05:29:31 PM »
I didn't really want to start pulling it apart until I had the parts.
I can probably get a shot of the half shaft tomorrow.
Thanks.

Simple Man

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 292
  • Member Rating Points: +11/-0
Re: Need Help!
« Reply #4 on: November 13, 2017, 05:08:30 PM »
Here are some Pics.
Anything specific I can show?

A picture(s) of the part(s) that are the issue.

Ccemn1

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 91
  • Member Rating Points: +0/-0
Re: Need Help!
« Reply #3 on: November 13, 2017, 05:02:46 PM »
Here are some Pics.
Anything specific I can show?

AdrianBurton

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 415
  • Member Rating Points: +19/-0
Re: Need Help!
« Reply #2 on: November 13, 2017, 02:44:11 PM »
post some pics, that might help.  But you should still have fiero wheel bearings

Ccemn1

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 91
  • Member Rating Points: +0/-0
Need Help!
« Reply #1 on: November 13, 2017, 12:16:33 PM »
I recently purchased an IFG, Fiero based Diablo that had virtually zero maintenance.
I'm desperately trying to sort out the problems now.
I need a drivers side rear wheel bearing and a drivers side half shaft.
I'm guessing the half shaft would be a Fiero item, but the rear suspension doesn't look like Fiero and I was told it was "Bump Steer" suspension, whatever that is? So, I'm wondering if that rear wheel would take stock Fiero wheel bearings, or not?
I'd greatly appreciate anyone's help.
Thanks in advance.