How To - Tips > Electrical

Air ride system

(1/1)

CCIE:

--- Quote from: Lambolegend on August 02, 2020, 05:49:37 PM ---Hey Guys,
I'm down to the last problem to restoring my car to the way it was built.
The air ride system,
The compressor works, the tank fills and when it's filled, the car rises. I can't seem to control the rising or lowering. I've tested the relay and the switch and they are fine. The only part I'm not sure of is the box in the picture I've attached. The only paperwork I see is Hendrickson also in attached pics. I've found a couple of generic diagrams online but nothing truly helpful.
Any suggestions?

--- End quote ---

Cant really tell from pictures. Majority of what's in the replica are all custom. The picture of the box looks like the relay driver circuit to power the valve solenoid. Attached is a picture of how an old system was setup in one of my replica. Hope this can assist

Lambolegend:
Thanks
Good videos, unfortunately not what I need, I'll keep plugging away.

italianknightrider:
https://www.youtube.com/watch?v=pwCUW4pZNOo

https://www.youtube.com/watch?v=dgZHJv9DL10

Jets303:
Any hoses going into the box?

Lambolegend:
Hey Guys,
I'm down to the last problem to restoring my car to the way it was built.
The air ride system,
The compressor works, the tank fills and when it's filled, the car rises. I can't seem to control the rising or lowering. I've tested the relay and the switch and they are fine. The only part I'm not sure of is the box in the picture I've attached. The only paperwork I see is Hendrickson also in attached pics. I've found a couple of generic diagrams online but nothing truly helpful.
Any suggestions?

Navigation

[0] Message Index