Build Diaries > Aventador

Aventador wheels with C6 hubs

<< < (2/2)

LP700-4:
I spoke with Dario who is using the same hubs and he went with 1.5 " thick adapters. This is here for anyone else search for this information.

LP700-4:
Hi all,

I am planning on using OEM Aventador rims with my C6 corvette suspension. I do not have the rims yet but my research shows the following:


* Rear Aventador bolt pattern 5x120
* Rear Hub Center bore 70.1mm
* The C6 has a 5x120.65, which might be okay or the hubs can be redrilled
* The C6 Rear hub is 70.3mm. I should be able to turn the hubs to reduce to the 70.1mm
* Front Aventador bolt pattern is 112mm. Can anyone confirm this?
* Front hub center bore is 57.1mm
* C6 bolt pattern is 5 x 120.65mm which should be able to be redrilled to 112?? Anyone know for sure?
* The biggest issue is the C6 center bore is 70.3mm and there is not enough wall thickness to turn it down to 57.1mm
I have a few options that I can think of but has anyone actually done this?

Options:
1. Grind down the center hub flush with the rotor and use the lugs to center the rims
2. Buy 1" to 1-1/2" wheel adapters and adjust the frame for the additional 2" to 3" hub to hub distance
3. Grind down the center hub flush with the rotor and add an hub centric adapter inside the C6 hub to align the C6 hub to the Aventador rim.

Navigation

[0] Message Index

[*] Previous page