Author Topic: Need exhaust advice-  (Read 1420 times)

usmc_butler

  • Lambo Mafia
  • Administrator
  • Trade Count: (+11)
  • Hero Member
  • *****
  • Posts: 1658
  • Member Rating Points: +33/-0
  • Mafia Productions
    • Lambo Mafia
Re: Need exhaust advice-
« Reply #5 on: March 13, 2013, 08:15:35 AM »
Tony cant wait to see and hear how everything works out! Im in for the easiest and best looking option and that would be #2 picture

01Lambiero

  • Trade Count: (+1)
  • Hero Member
  • *****
  • Posts: 944
  • Member Rating Points: +21/-3
  • "Using the skills that God gave me"
Re: Need exhaust advice-
« Reply #4 on: March 13, 2013, 05:46:47 AM »
Im not sure if something like this would look good on a Diablo run as a single:

That is the same muffler that I am going to use although I am headed for the GTR look with the muffler mounted on an upward angle.  I'm going to have to cut off the tips and rotate them 180ΒΊ.  I don't like the third option.  My $0.02  Jim
20 yr. GM Niase certified Auto Mechanic (Tune-Up, Brakes, & Heavy Repair)
24 yr. GM Automated/Robotic Welding Systems
Retired

tonypaul

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 291
  • Member Rating Points: +6/-0
Re: Need exhaust advice-
« Reply #3 on: March 12, 2013, 10:24:36 PM »
or even a worse photoshop example:

tonypaul

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 291
  • Member Rating Points: +6/-0
Re: Need exhaust advice-
« Reply #2 on: March 12, 2013, 10:17:50 PM »
Im not sure if something like this would look good on a Diablo run as a single:
« Last Edit: March 12, 2013, 10:26:36 PM by tonypaul »

tonypaul

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 291
  • Member Rating Points: +6/-0
Need exhaust advice-
« Reply #1 on: March 12, 2013, 10:16:18 PM »
Im almost ready to swap out my sbc/5 speed with my LS4/4t65ehd. The sbc is still in my Diablo and Im still going to be driving it until I have everything completly ready to swap. I figuring it will take only take me 2 days to do the swap. Im just waiting for my Microsquirt to come back from getting another board put in, I had a little accident with it. Other than that everything is ready, I got my trans controller installed with paddle shifters, the LS4 is done, axles are done, and have everything ready except exhaust.

I still have the factory exhaust manifolds on the LS4, with the factory crossover pipe that feeds into the rear exhaust manifold. So from here Im not sure what I want to do, should I "Y" off the rear manifold and run 2 seperate mufflers or run into a single in / dual out muffler? And the big question- would a Diablo Roadster look wierd with 2 exhaust tips coming out together or should I stay with the factory Diablo look with 2 dual out tips seperated?

Please forgive my super quick photoshop diagram, but hopefully you will understand what Im asking:

like this: