Author Topic: Aventador custom chassis drawings for 500 USD / 470 EUR  (Read 52813 times)

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #125 on: December 02, 2016, 01:00:19 AM »
1. "Rolling chassis package". A fully built and coated chassis complete with wheels, brakes and brake lines, suspension parts, rack&pinion, steering column and steering wheel, pedals, and fuel tank pre-installed. Components, such like: engine, transmission, seats, radiators and pipes, A/C, battery and electrical system are not included. Price is 18 800 EUR (20 000 USD) + shipping from Bulgaria or Finland. Shipping requires a large crate box or cargo container.

  2. "Bare chassis package". A fully built bare chassis (just like the above, but no paint, wheels, brakes or any additional OEM or donor parts) is 7 000 EUR (7 500 USD) + shipping from Bulgaria or Finland, or 10 000 USD from USA. Shipping requires a large crate box or cargo container. A temporary WD-40 protective coat is applied to allow convenient welding of any additional brackets to mount the necessary donor parts of your choice.

 3. "Chassis starter package". An economy package consisting all the necessary separate pre-cut with CNC-laser machine: tubes, metal plates and sheets for the chassis, suspension and uprights, as well as the CNC-bent roof tubes. All metal plates have dedicated mounting holes and pins for perfectly accurate assembly. The metal tubes, plates and sheets must be assembled and welded by the builder himself using the supplied instruction manual. Price is 5 500 EUR (5 900 USD) + shipping from Bulgaria or Finland. All fit inside a small wooden crate box whose length is 2000 mm (about 78"), width is 1000 mm (about 39") and the height is greatly reduced (about half meter).

 4. "3d CAD chassis package". For those who are looking for a complete solution (like custom car shops wanting to build multiple chassis), the original 3d CAD model of the Govedo chassis in Rhino's native *3dm file format (NURBS solids) is obtainable for 15 000 EUR (16 000 USD). The file consist all the tubes, metal plates and sheets, machined (turned) parts etc required for the chassis, suspension and door hinges. Included are also dimensionally accurate 3d models of 11" and 14" QA-1 coil-overs and Corvette C5 hub-bearings that I modeled after carefully taking measurements from the actual parts. Next to the fully assembled 3d chassis are placed tens of separate chassis sections that are designed to be preliminary assembled and welded on flat MDF jigs, whose 3d models are also included.

 5. "Govedo chassis plans". A limited-time offer for ordering the final batch of my Govedo chassis plans. The package consists individual drawings for each tube type printed on A4 paper, build instructions and schematics printed on A4 and A1 paper, and a DVD with AutoCAD DWG/DXF files for CNC-laser cutting of all the necessary metal plates and sheets. Price is 1 200 EUR (1 300 USD) + shipping in an envelope from Bulgaria.
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #124 on: October 29, 2016, 05:13:13 PM »
I live in the United States.   what is the website to go to so i can purchase a chassis     

 Hi,

 You can contact "Finnluxury" Oy which is the manufacturer of the chassis at Finland. Usually quickest reply is given at https://www.facebook.com/finnluxury or info@finnluxury.com . Hopefully this helps. Soon I will update the information if there is an option for purchase the chassis directly from a contractor based in USA, since the tubes are no longer cut by hand using my chassis plans. Recently I made a vast amount of upgrades to the chassis design and now the tubes feature over 1000 pins and holes to guarantee precise assembly of the whole structure. This is only possible with an advanced 7-axis CNC-laser cutting of the tubes and the chassis offered by "Finnluxury" Oy is exactly like that. You can read more information about the upgrades over here: http://lamboclone.com/index.php?topic=2390.msg29935#new

 Cheers!

 Bobi
« Last Edit: October 29, 2016, 07:48:33 PM by plans4sale »
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

powelmc

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Member Rating Points: +0/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #123 on: October 29, 2016, 04:53:47 PM »
I live in the United States.   what is the website to go to so i can purchase a chassis     

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #122 on: January 28, 2016, 02:48:19 AM »
 Attached here are a few pictures of my final design of the Govedo chassis and suspension. I still do improvements on some of the metal sheets on the floor, sides and rear firewall, this is why they are not yet present in the pictures. The weight* (approximate calculation in a 3d software based on steel weight 7800 kg per cubic meter) of the EU version of my chassis should be as follows:

- Bare chassis with no suspension and metal sheets: 274 kg (604 lbs);
- Chassis with partial metal sheets (as shown in the pictures), suspension arms and wheel hubs: 381 kg (840 lbs);
- Chassis with full metal sheets, suspension arms and wheel hubs: 395 kg (871 lbs). Optionally, if 1 mm metal sheet in certain areas is replaced with 2 mm one, for extra frontal crash protection, the weight goes up to 430 kg (948 lbs).

 For comparison, by using the same formula for calculation, a steel replica Diablo (NAERC) chassis with the roll-cage, suspension, 2/3 of the central tunnel, and 1/2 of the metal sheets missing appears to weight about 327 kg (721 lbs). It's said to be 394 kg (868.43 lbs) with suspension.


PS: Full resolution images (about 450 kB each):
http://i.imgur.com/gMgSc6v.png
http://i.imgur.com/YkOLuG7.png
http://i.imgur.com/TRrWWXJ.png
http://i.imgur.com/h5hSX3c.png
« Last Edit: February 04, 2016, 12:00:19 PM by plans4sale »
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

ncrazyballa

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 43
  • Member Rating Points: +1/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #121 on: January 27, 2016, 06:54:48 PM »
looks okay.

76mx

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 635
  • Member Rating Points: +12/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #120 on: January 27, 2016, 04:31:12 AM »
Those viewings must have happened while the pictures were temporarily thrown haphazard into a parallel universe. Good thing it did not upset the time and space continueum and suck us all in.

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #119 on: January 26, 2016, 09:17:34 PM »
 
Not sure what is happening with these pics. First they won't post ,now they post twice.
They all appeared as "viewed 27 times" right after the upload. ::beers
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

76mx

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 635
  • Member Rating Points: +12/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #118 on: January 26, 2016, 08:32:01 PM »
Not sure what is happening with these pics. First they won't post ,now they post twice.

76mx

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 635
  • Member Rating Points: +12/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #117 on: January 26, 2016, 08:29:22 PM »
More pics.

76mx

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 635
  • Member Rating Points: +12/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #116 on: January 26, 2016, 08:26:12 PM »
Ok,.............well if you change your mind about selling a chassis plan let me know. Because Dubruc has not back to me about the aluminum chassis, so I'll probably going with someone else's design.

Rob,  ::beers
RJ, I know you were disappointed when you missed out on the steel chassis that I just sold to Canada. I see now that you are interested in an aluminum one. Here it is, an aluminum Aventador chassis, $8,000. Don't miss out again!

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #115 on: January 24, 2016, 08:59:32 PM »
 Rob, although the chassis plans are no longer available for purchase, there are a few other options for my Govedo chassis aimed for Aventador replica builds for purchase either from Finland or Bulgaria (both in Europe), as well as the option to directly order the chassis from USA at $10,000. Soon, I will start a separate topic dedicated to this matter.

1. "Rolling chassis package". A fully built and coated chassis complete with wheels, brakes and brake lines, suspension parts, rack&pinion, steering column and steering wheel, pedals, and fuel tank pre-installed. Components, such like: engine, transmission, seats, radiators and pipes, A/C, battery and electrical system are not included. Price is $20,000 + shipping from Bulgaria or Finland. Shipping requires a large crate box or cargo container.

  2. "Bare chassis package". A fully built bare chassis (just like the above, but no paint, wheels, brakes or any additional OEM or donor parts) is $7500 + shipping from Bulgaria or Finland, or $10,000 from USA. Shipping requires a large crate box or cargo container. A temporary WD-40 protective coat is applied to allow convenient welding of any additional brackets to mount the necessary donor parts of your choice.

 3. "Chassis starter package". An economy package consisting all the necessary separate pre-cut with CNC-laser machine: tubes, metal plates and sheets for the chassis, suspension and wheel hubs (uprights), as well as the CNC-bent roof tubes. All metal plates have dedicated mounting holes and pins for perfectly accurate assembly. The metal tubes, plates and sheets must be assembled and welded by the builder himself using the supplied instruction manual. Price is $5,500 + shipping from Bulgaria or Finland. All fit inside a small wooden crate box whose length is 2000 mm (or about 78"), width is 1000 mm (or about 39") and the height is greatly reduced.

 *Mild steel is used as a primary material. If a more expensive metal type is requested for the chassis, such like stainless or chromoly tubes, that will affect the price according to the specified material cost.

 **No matter the package, a 75% down payment is necessary up front, with the remaining 25% + shipping cost (unless the latter is arranged by the buyer) covered upon shipping of the crate box.


 Keep in mind that my Govedo chassis is not super light, it's designed for high-performance (lots of HP and better tyre grip while high-speed cornering) and driver occupant safety. The roof roll-cage is properly built and use stiff CNC-bent round tubes with over 6 mm wall thickness. It's a far cry from the weak tubing that most replica Lambo chassis use. The same goes for the side protection and the whole structure as well. This adds up to the cost and weight, but I believe that a smart person would rather have safety over slightly cheaper and lighter car. The front suspension features variable camber angle and caster angle depending on the turn degree and direction. My chassis does use some premium components whose price is higher than what the usual kit car builder spends on his/her build. For example, the 36 rod ends by QA1 will cost about $920-960 alone, and brakes are 14" and 14.25" by Wilwood. The small diameter stock Corvette C5 brakes will not fit my wheel hubs, because the latter are designed for strength and use 19" front and 20" big rear wheels, hence the lower ball joints and upper rod ends of the wheel hubs are moved as close as possible to the rim's inside profile to provide better performance and less stress on all the components involved. 17-18" or smaller rims will not fit my suspension (but they also don't look right on an Aventador replica). Also, I recommend using stiffer spring in the front end (to prevent collision of the tyre with the upper side of the wheel well due to the limited space inside), and some stores sell them for slightly higher price than their softer counterparts.
 If I can help with more information, please, let me know.
 Bobi
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

Rob James

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 113
  • Member Rating Points: +4/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #114 on: January 24, 2016, 08:01:44 PM »
Ok,.............well if you change your mind about selling a chassis plan let me know. Because Dubruc has not got back to me about the aluminum chassis, so I'll probably be going with someone else's design.

Rob,  ::beers
« Last Edit: January 28, 2016, 11:26:08 AM by Rob James »

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #113 on: January 24, 2016, 06:01:25 PM »
I thought you weren't going to sell any of your chassis plans after Oct.9th. 2015, has that now changed?

Rob,  ::beers

 Hi Rob,

 You are correct, I discontinued selling my chassis plans several months ago and now started to take inquires for selling the built chassis instead. The most recent updates in this topic are made for the nice people who already use my chassis plans for their builds. In fact, it would be a good idea if I start a new topic in another forum section dedicated for the remaining updates only, and leave the current topic opened just in case, but not writing inside as I don't want to move others' ads for sale down.

 Cheers,

 Bobi
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury

Rob James

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 113
  • Member Rating Points: +4/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #112 on: January 24, 2016, 02:39:08 PM »
I thought you weren't going to sell any of your chassis plans after Oct.9th. 2015, has that now changed?

Rob,  ::beers

plans4sale

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 260
  • Member Rating Points: +2/-0
Re: Aventador custom chassis drawings for 500 USD / 470 EUR
« Reply #111 on: January 24, 2016, 05:12:49 AM »
 UPDATE:

The current progress of the EU and both US chassis plans is as follows:
A - Floor level [fully completed]
B - Bumpers [fully completed]
C - Engine cradle [fully completed]
*D - Door frames and hinges [not yet started]
E - Engine bay [fully completed]
F - Front end [fully completed]
R - Roof roll-cage [fully completed]
S - Sides of the cockpit [fully completed]
T - Central Tunnel [fully completed]
W - Firewall [fully completed]
*M - Metal sheets and plates [half completed]
MP - Machined parts [fully completed]
SP - Suspension tubes [fully completed]
Custom 3d car & chassis design: https://www.facebook.com/sportni.koli.3
Finnluxury Tritium (FLT) body kit and chassis: https://www.facebook.com/finnluxury