For Sale / Wanted > Services
Aventador custom chassis drawings for 500 USD / 470 EUR
plans4sale:
Yes, these tubes with exactly the same bend radius but shorter in length could be used for the Roadster version. However, for Roadster it's recommended to use thicker support tube for the A2 pillar (the vertical one between the small triangle window and door window). Plus, slightly different reinforcement tubes above the firewall. My plans will include both, the Coupe and Roadster roll-cages.
italianknightrider:
SPLASH MOLD
Roof support for both Versions
so this is a separate section
plans4sale:
Here is a quick sample view of the custom wheel hub. Still in the making. As I design the steel plates with intergrated pins and holes, it will be virtually impossible to assemble the wheel hub the wrong way. ::thumbup I added some nice room for the welds around corners, but I will further reduce the size of pins from 5 mm to 2.5 mm, in order leave even more room for welds and completely hide the pins underneath. :)
plans4sale:
Thank you for the kind words, Alan!
autopro, yes, the package will include plans for the suspension as well. It will use custom designed wheel hubs and A-arms, and utilize the following parts:
+ 1997-2008 Corvette C5/C6/ZR1 hub/bearings by SKF (http://www.c5racer.com/catalog/c5-c6-z06-zr1-gs-corvette/suspension-corvette/c5-suspension-upgrades/c5c6-corvette-wheel-hub-bearing-assembly-heavy-duty-and-racing-front.html)
+ Corvette C5 stock or Wilwood brakes
+ Mustang ball joints (http://www.summitracing.com/parts/sum-bj-0327/overview/make/ford/model/mustang)
+ QA1 coil-overs 11" Front (http://www.speedwaymotors.com/QA1-Adjustable-11-Inch-Coil-Over-Shock-Kit,1207.html)
+ QA1 coil-overs 15.3" Rear (http://www.speedwaymotors.com/QA1-Adjustable-153-Inch-Coil-Over-Shock-Kit,39184.html)
However, I still don't have the dimensions for the Mustang ball joint, so I can't fully complete the suspension design unless I make a 3D CAD model of the ball joint. The Corvette hub/bearings and QA1 coil-overs I already measured and made exact copies in 3D.
http://img841.imageshack.us/img841/1064/corvettec52.png
autopro:
Will the plans include the suspension?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version