Author Topic: countach part  (Read 4213 times)

Countach5.7

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #8 on: September 11, 2020, 04:13:37 PM »
can do a pair for £400, on the original they fit by riveting to the side panel and chassis instead of the original curved sill, will post pics as soon as i find them.....

Nuzguy

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 4
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #7 on: August 09, 2020, 12:34:34 AM »
Gelcoat would be great. Please let me know how much? Would they bolt on?

Countach5.7

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #6 on: August 08, 2020, 07:53:29 AM »
I have still got the moulds, but I haven't made use of them in a while, I don't know what my contact would charge to layup a set, haven't talked to him in months. would you want them with a gelcoat finish, pigmented fibreglass or natural?
regards
Jonathan

Nuzguy

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 4
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #5 on: July 26, 2020, 01:34:47 PM »
Hi guys, sorry to pull this from the dead thread pile but these side skirts are exactly what I’m looking for. 88.5 strakes. Is anyone on this thread still here?

Nuz

Countach5.7

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #4 on: August 16, 2013, 03:46:33 PM »
I have moulds for the 88.5 strakes in my garage (taken from genuine parts).
Note that they are different to the Anniversary, the 88.5 strakes run in a continuous straight line parallel to the bottom of the door, the Anniversary skirts are parallel from the front wheelarch to the rear of the door but then slope gently up to meet the rear wheelarch.
l'm in the UK but if you need 'em.....

donc

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 4
  • Liked: 0
  • Member Rating Points: +0/-0
Re: countach part
« Reply #3 on: June 28, 2013, 02:41:05 AM »
I have those side strakes if you still need them.

Linlor

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 109
  • Liked: 28
  • Member Rating Points: +5/-0
Re: countach part
« Reply #2 on: May 24, 2013, 04:19:19 PM »
Try Cliff Miller as he has a 25th anniversary body and I believe he has molds for the strakes.  If I remember correctly, the 25th and 88.5 were the same lower rockers and other parts were changed back to 5000s specs?

Cheers
Don

mikemal7

  • Guest
  • Trade Count: (0)
countach part
« Reply #1 on: March 20, 2013, 06:22:54 AM »
Hi Guys,

New member.  Looking for a countach part--side skirts for the 88.5 model of the car. Any sources for getting this?
Any sugegstions welcomed!

Mike