How To - Tips > Heating and Cooling
Bead Roller for Tubing
(1/1)
usmc_butler:
Thats nice...! ::headbang
01Lambiero:
I needed a bead roller to make my tubing ends for my radiator lines. I decided that I could make my own. I used it on 1.25" 0.035" wall aluminum and 1.50" 0.65" wall aluminum tubing. I did not try it on stainless or metal yet. It works super. Here it is. ::headbang
Jim
Navigation
[0] Message Index
Go to full version