How To - Tips > Steering / Suspension
Proportioning valve
(1/1)
aeauto:
An adjustable proportioning valve will be needed in the rear line. 3/16 brake line should be fine. Sometimes I run 1/4 back from the master cylinder to a T where the line splits to the each side for the rear brakes. I use 3/16 from the T to each wheel.
rodrieguz:
I used a wilwood proportioning valve with 13" brakes
norcaldiablo:
I am ready to start on my brakes.
I have 13" rotors on all corners.
What proportioning valve are you using for your setups?
I have power brakes and a custom chassis (not Fiero).
Also, what size lines to the front and rear brakes?
Any special tricks?
Thanks
Navigation
[0] Message Index
Go to full version