Purple People Eater LP670 SV Build!!!

[Purple LP670 SV]

A sneak peak of my upper control arms!!!

[Purple LP670 SV]

Making little progress on my front control arms and was curious what others have used for springs? I'm going mostly same as stock but 2" wider per side, with 1 1/2" lowering springs! What I'm wanting to know is will 400 lb springs be obnoxiously rough, or should I go with the 350 lb springs that I was originally planning on? I'm looking for it to corner like it's on rails without breaking my back! Any input would be greatly appreciated!!!   

[usmc_butler]

Haven't been on here much! But great progress! Always good to see people moving forward

[autopro]

I received my Ford Eurostyle markers, not half bad for about $10!

I have these same markers, they look very good.  You are doing some fine work there bud!

[Digibeam]

On another note, that is a Very patriotic ladder you have there....
 

[Purple LP670 SV]

Cross member and a few other parts ready to go back on!!!  More updates soon to come!!!!!!! 

[Purple LP670 SV]

Cleaned up some of my front end!!!

[Purple LP670 SV]

Made a little progress. Started hanging my radiators, they are just kinda tacked in place at the moment till I figure out the rest. Also taking a page out of Butler's build with my coolant lines!!!

[Purple LP670 SV]

I received my Ford Eurostyle markers, not half bad for about $10!

[Purple LP670 SV]

I'm excited to see what you come up with for inserts! Hopefully you plan on making a mold cause I'm sure after your glass suggestion there will be a lot of interested folks out there!!!   

[lp670mike]

Glad you are happy with the glass! I started making my fiberglass inserts for my quater glass. Hopefully I will get them done this weekend and post some pics.

[Purple LP670 SV]

Cool Thanks.  Did you need big spacers with these? 
I was thinking about getting these wheels rota 18x12 they have a big offset so I thought maybe I could get away with some smaller spacers maybe? But seeing your wheels I am liking them too!

http://www.racinglab.com/rota-p45r2-18x12-001.html

They did require larger spacers in the rear but will eventually be replaced with longer rear a arms! I plan to widen the front as well to eliminate any need for spacers! The rims you have picked out look good  I have received my Scion quarter glass and it appears that it will work just fine! I appreciate you posting this as it will be a great alternative. Like you said it will require some sort of trim to take up some of the voids! Thank you Much!!!

[lp670mike]

Cool Thanks.  Did you need big spacers with these? 
I was thinking about getting these wheels rota 18x12 they have a big offset so I thought maybe I could get away with some smaller spacers maybe? But seeing your wheels I am liking them too!

http://www.racinglab.com/rota-p45r2-18x12-001.html

[Purple LP670 SV]

Thanks Mike! I purchased 19x12 rear and 18x9.5 front Z06 wheels! I felt it was a good compromise for price and looks! If I remember correctly I gave about 800 bones for all 4!!!

[lp670mike]

Sounds awesome! Keep up the great work!
What wheel do you have on it in the video. They look awesome.