LamboClone - The Premier Site for Lamborghini Replica Builders
How To - Tips => Rims & Tires => Topic started by: LamboJayso on December 22, 2012, 08:44:47 AM
-
Let this thread serve as a source for anyone who is building a G28 body or OEM body Murci, can have these rims ordered. I had the rims built specifically to bolt directly up to the Fiero hub and sit flush with the body. Since iForged has all my information, they can have any other of their rims built to fit as well. The rear rims are 20x13 w/9" lip and the fronts are 19x8. The rims alone cost $4k shipped.
(http://i50.tinypic.com/142slzr.jpg)
(http://i49.tinypic.com/11trats.jpg)
(http://i45.tinypic.com/2hrn3m1.jpg)
(http://i49.tinypic.com/1dxzle.jpg)
-
How's the clearance between the rear wheel and the rear strut?
Jim
-
There are no clearance issues between the rear wheel and the rear strut or fronts for that matter. There's an old youtube video of me driving around in a parking lot with the same wheels.
(http://i50.tinypic.com/vdz61l.jpg)
-
Those are very nice rims, but for the price you could get used OEM Murcielago or Gallardo rims on Ebay. But just for reference is there a website or number to the manufacture of the rims.
-
I guess I over looked your first post where it said Iforged, I just added the dot com and there it was.
-
getting a set what do i need to tell them 4 a set r jest ttell them what i need ::LAMBO
-
getting a set what do i need to tell them 4 a set r jest ttell them what i need ::LAMBO
Pm sent
-
You might have posted this somewhere else but what size tires are you running, and what is the back spacing on the rims.
-
I'm running 345/25/20 & 235/35/19. I'm not sure what the backspacing is.
-
I'm assuming the rear wheels have about 4 inch backspace since it is 13 inches wide with a 9 inch lip. Is there a lip at all on the front ones?