LamboClone - The Premier Site for Lamborghini Replica Builders
Misc. Tech Drawings / Manuals => Technical Drawings => Topic started by: redewaan on July 29, 2017, 06:36:09 PM
-
Hi,
Any one knows the front and rear overhang for the Aventador?
-
Forgive my ignorance...can you explain what you mean by that?
-
The distance from the center of the wheel to the rear and front.
-
I'm not sure what your required tolerances are...so these numbers might be off just a bit. By my measurements, the front overhang is 41" and the rear overhang is 34".
-
I'm not sure what your required tolerances are...so these numbers might be off just a bit. By my measurements, the front overhang is 41" and the rear overhang is 34".
Ok...I took a profile view of the Aventador and measured the front and rear overhangs as a function of a known dimension (wheelbase is 106.3"). From that it turns out that the front overhang is 37.7" and the rear overhang is 32.9". Those numbers are more accurate than my trying to measure my car with a tape measure... ::study ::scratch
-
Hi. Thank you. Can you please measure the length of your door at the bottom in a hirizontal plane in mm or cm
-
Hi. Thank you. Can you please measure the length of your door at the bottom in a hirizontal plane in mm or cm
The door is 42.2" in the horizontal plane
-
You can save a lot of posts if you would scale your dimensions from a blueprint.
https://www.mypatentprints.com/product/lamborghini-patent-patent-print-wall-decor-automobile-decor-automobile-art-lamborghini-aventador-patent-lamborghini-blueprint/ (https://www.mypatentprints.com/product/lamborghini-patent-patent-print-wall-decor-automobile-decor-automobile-art-lamborghini-aventador-patent-lamborghini-blueprint/)
01