For Sale / Wanted > Replica / Modified Parts For Sale
Murcielago Taillights
lp670mike:
Understood. Is there any mounting provisions on the backside of the housing, also were the holes along the bottom designed around a known LED?
nickmkk:
Well it would be up to you to epoxy the pieces together, finish the body work and paint the housing, sand down and clear coat the arrows, etc. The lens will just be clear but you could paint them with a red clear coat like in the link, it would probably be a good idea to use that on the arrows as well to make the color more even after a couple coats of clear.
https://www.amazon.com/gp/product/B0069G12OC/ref=ppx_yo_dt_b_search_asin_title
The housing is scaled to OEM size and the lenses are actually being made from a mold of OEM lenses.
--- Quote from: lp670mike on March 31, 2023, 08:20:28 AM ---I would be interested, but would like to see the finished product. What are your thoughts on lens color?
I would prefer to have them red. Like 640 lights. Very nice work so far! How accurate are these to OEM dimensions?
--- End quote ---
lp670mike:
I would be interested, but would like to see the finished product. What are your thoughts on lens color?
I would prefer to have them red. Like 640 lights. Very nice work so far! How accurate are these to OEM dimensions?
nickmkk:
Awesome thanks a bunch for this, I'll compare with my files after work and see how close I am. Dale is also going to send me some files so I may switch to those if they're better than what i have.
--- Quote from: Neils88 on March 30, 2023, 03:09:16 PM ---Here are the measurements of the oem Aventador rear light assembly. Hopefully you can read my writing. This is pretty tough to measure accurately without removing the clear lens, so my tolerances are probably around 0.25". Hopefully this gives you enough info to make it. If you need any other specific measurements, let me know. Note that there is a height difference for the components. I can send more photos if needed.
I also made a thread with respect to wiring the taillight. It has some good photos of each of the individual lights.
http://lamboclone.com/index.php?topic=3522.0
--- End quote ---
Neils88:
Here are the measurements of the oem Aventador rear light assembly. Hopefully you can read my writing. This is pretty tough to measure accurately without removing the clear lens, so my tolerances are probably around 0.25". Hopefully this gives you enough info to make it. If you need any other specific measurements, let me know. Note that there is a height difference for the components. I can send more photos if needed.
I also made a thread with respect to wiring the taillight. It has some good photos of each of the individual lights.
http://lamboclone.com/index.php?topic=3522.0
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version