LamboClone - The Premier Site for Lamborghini Replica Builders
Build Diaries => Aventador => Topic started by: apsara on July 25, 2012, 04:45:37 PM
-
A set of cross section plans for sale if anyone is interested in making their own set of plugs and molds. Plans are only $50 to purchase. Have many other models you can choose from other than the aventador, if there is a certain car that you are looking for I can make you a set of plans for it.
-
Here are some sample drawings of the sections
this is the model that was used to make the sections
(http://i1259.photobucket.com/albums/ii542/apsara3d/lamborghini-aventador-2012-3d-model3.jpg)
(http://i1259.photobucket.com/albums/ii542/apsara3d/lamborghini-aventador-2012-3d-model.jpg)
(http://i1259.photobucket.com/albums/ii542/apsara3d/A10.png)
(http://i1259.photobucket.com/albums/ii542/apsara3d/A9.png)
(http://i1259.photobucket.com/albums/ii542/apsara3d/A8.png)
(http://i1259.photobucket.com/albums/ii542/apsara3d/A7.png)
(http://i1259.photobucket.com/albums/ii542/apsara3d/A6.png)
-
apsara.
I got a few emails from people looking for one, however, it needs to be comparable to the Tijuana based kit (aka IKR kit) which has less than 3" in former to former distance!
How many formers cross sections is it? and are you able to make it 3" rather than 10" inches between the center of each of former to the next former? Even if that doubles the price then you may still have many more people interested! Also, will you chop it in the Y axis as well?
I believe it has to be as good or better than this
http://lamboclone.com/index.php?topic=93.msg2410#msg2410 (http://lamboclone.com/index.php?topic=93.msg2410#msg2410)
If so, I could add it to my journal
http://www.madmechanics.com/forum/consumer-opinions/15662-lamborghini-aventador.html (http://www.madmechanics.com/forum/consumer-opinions/15662-lamborghini-aventador.html)
and refer a couple of people
This reminds me of the incredible & patient bierhanzel build I read a year ago http://www.madmechanics.com/forum/build-diaries/13642-murcie-lp640-build-11.html (http://www.madmechanics.com/forum/build-diaries/13642-murcie-lp640-build-11.html)
::beers
Thanks
-
Am33r,
Yes i can redo the model in to 3" sections, but it is a ton of work to do and takes more than a week to have a plan ready for building. There is alot of manual editing to have them ready. Price for the plans will definitely have to be higher than what I am selling them for now. $175 for it
-
I didn't think it should take a week. But I definately think it should be far more accurate even if it took time - I'd suggest it to others. I made 40 slices and mark all of them correctly in a weekend, but that's not what I do, and my plan isn't for sale. I just think it needs more precision in many crucial areas whereas you are right some areas near the middle of the vehicle can be spaced 6' to 8" but in other areas should be a lot less.
-
I am interested in purchasing the plans , if you have dversions re spaced version I would be interested in them preferably but if the ten inch spacing is the only version , that's ok .
-
I don't make section plans anymore sorry, it takes up way too much of my time. and what ever plans I had I deleted them. I only machine plugs or sell cnc machines and 3d printers.
-
Thanks anyway , will try to work from a model and dimensions from a drawing I found online l cheers
-
You can download 3d models for free from several places. Do a search on google. I've sliced a project before with Rihno I believe... It was actually very easy. The prompt just asks the slice direction and thickness, software does the work for you. I will try to figure it out again today. ::thumbup
-
Hi Guys, I'm Bobi1 from the Madmechanics forum. I just found this nice forum after reading post at Madmechanics with a link redirecting here.
I'm almost ready with Aventador plans for building body plug with wooden cross sections. This is NOT just some quick projection of sections on the 3d model for a few minutes, like other people trying to sell plans do. I always add lots of additional details, make channels, ribs, holes etc, and my plans are 100% usable. The amount of work is huge. The cross sections I arranged at variable distance in order to provide useful information, such like where the door openings and window openings start and end, to name a few. There are 7 mm deep and 7 mm wide channels to mark the location of all body panel gaps. They are all hand drawn by me as well. It's supposed that builders will cover the wooden/foam plug with up to 2 mm thick layer of hard coat and body filler, so the 7 mm wide gaps on the wooden formers will become 3 mm on the fine finished plug, and 5 mm deep. Perfect for easy release of the moulds. I also add thin lines at each edge (aka "crease line" in the cardesign field) where the degree is too small, so using these guide lines you will know there MUST be an edge in that particular location even though it may look nearly smooth.
For my cross section plans I'm using the 3d model of Lamborghini Aventador extracted by the video game "Forza Motorsport 4" which is low-poly, but is probably the most accurate 3d model of the car and I also improved the shape in some areas to make it even more accurate. Since the 3d model is low-poly Mesh, I had to manually redraw the extracted cross sections using curve approximation technique to get perfectly smooth curves that a 3d Mesh model itself can't.
I make curve approximation and setup the plans to be able for printing on large paper size such like the European standard A0, or similar (suggestions here for American standard?). The plans are in AutoCAD's native DWG file format used by all modern plotters, printers and projectors, and popular CAD software as well.
Current pre-order price is set to 100 USD / 75 EUR, and once the plans are completed* they will cost 200 USD / 150 EUR. Also, people who purchase(d) my Aventador chassis plans will receive the body plug plans for free.
*in about one-two weeks depending on how long the curve approximation will take
You can contact me at e-mail: chassis_plans_4_sale at yahoo dot com
Shown below are some examples of plans I made for IKR's Reventon plug 4 years ago, just to show you the details I draw additionally on the cross sections and how the corresponding wooden pieces "lock" together with ease thanks to the additionally designed ribs and channels.
PS: Please, note that there are couple of almost-finished Aventador body plugs made out of foam that some other guys at Madmechanics are currently making, so consider carefully if you want to start building of Aventador plug from scratch, OR just wait a while for some fiberglass kit to be offered on the market. Building plug and moulds by yourself is not recommended unless you are experienced and know you can handle this type of work.
(example of the curve approximation I do)
http://img831.imageshack.us/img831/5218/curveapproximation1.png (http://img831.imageshack.us/img831/5218/curveapproximation1.png)
http://img26.imageshack.us/img26/4142/curveapproximation2.png (http://img26.imageshack.us/img26/4142/curveapproximation2.png)
(examples of wooden cross sections designed by me)
http://img560.imageshack.us/img560/1338/dsc01893hy.jpg (http://img560.imageshack.us/img560/1338/dsc01893hy.jpg)
http://img198.imageshack.us/img198/5105/33939964.png (http://img198.imageshack.us/img198/5105/33939964.png)
http://img35.imageshack.us/img35/7780/dsc02159qa.jpg (http://img35.imageshack.us/img35/7780/dsc02159qa.jpg)
http://img818.imageshack.us/img818/3133/dsc02254g.jpg (http://img818.imageshack.us/img818/3133/dsc02254g.jpg)
http://img829.imageshack.us/img829/9181/dsc02163br.jpg (http://img829.imageshack.us/img829/9181/dsc02163br.jpg)
http://img109.imageshack.us/img109/5820/dsc02228p.jpg (http://img109.imageshack.us/img109/5820/dsc02228p.jpg)
-
hi would you be able to draw up some plans for a lexus lfa i really want a build of that car
-
hi would you be able to draw up some plans for a lexus lfa i really want a build of that car
I can do cross section plans for LF-A using a game 3D model from the web. With removable plugs for the doors and engine cover and hand drawn door jambs, plus curve approximation and panel gap markings additionaly created by me (as described in my previous post) it will take about 4 weeks to make and cost 400 Euros. For single-piece plug without curve approximation and additional details the time is about 1 week and cost 200 Euros.
-
ok cool ill hit you up soon for that thanks
-
OK, Thanks :)
-
My designer is finishing a set of ventador plans for me and I'm trying to d'éfray my costs , so I will offer them at the forum members price of $40
I'd like to get a group buy going so I will start another thread for that , but if you are interested immediately pm me
(http://img.photobucket.com/albums/v644/fwfinance/55047C42-1250-4A0B-A817-8469B84D94E1-2479-00000A40BFBE845D_zps7be8a93e.jpg)
They will be ready and delivered to all buyers next week , so no worry about sending money and not receiving anything for months
(http://img.photobucket.com/albums/v644/fwfinance/EAFF42F9-CC1E-432F-BB76-5418E846B651-2479-00000A40B0EECE06_zpsbdf1fc60.jpg)
-
My designer is finishing a set of ventador plans for me and I'm trying to d'éfray my costs , so I will offer them at the forum members price of $40
I'd like to get a group buy going so I will start another thread for that , but if you are interested immediately pm me
([url]http://img.photobucket.com/albums/v644/fwfinance/55047C42-1250-4A0B-A817-8469B84D94E1-2479-00000A40BFBE845D_zps7be8a93e.jpg[/url])
They will be ready and delivered to all buyers next week , so no worry about sending money and not receiving anything for months
([url]http://img.photobucket.com/albums/v644/fwfinance/EAFF42F9-CC1E-432F-BB76-5418E846B651-2479-00000A40B0EECE06_zpsbdf1fc60.jpg[/url])
This same set of plans was available on eBay for months and cost $25 and $28 depending on the seller. It was sold multiple times there. I have one customer who bought them and was not happy that they were just random cross sections made for few seconds, with no logical connection i.e. not buildable, so he is awaiting for my fully detailed and easily buildable plans to be ready in next couple of weeks. ::beers
http://www.ebay.com/itm/lamborghini-aventador-plans-to-build-/111018835048?pt=Plans_Blueprints_Guides&hash=item19d93cfc68&nma=true&si=IRw0ktC0tcWrY7HtqiOa7grMwx0%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 (http://www.ebay.com/itm/lamborghini-aventador-plans-to-build-/111018835048?pt=Plans_Blueprints_Guides&hash=item19d93cfc68&nma=true&si=IRw0ktC0tcWrY7HtqiOa7grMwx0%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557)
http://www.ebay.com/itm/How-to-Build-a-Lamborghini-Aventador-Body-Replica-with-Bonus-Bugatti-Veyron-/280878732053?pt=LH_DefaultDomain_0&hash=item4165ad5315&nma=true&si=IRw0ktC0tcWrY7HtqiOa7grMwx0%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 (http://www.ebay.com/itm/How-to-Build-a-Lamborghini-Aventador-Body-Replica-with-Bonus-Bugatti-Veyron-/280878732053?pt=LH_DefaultDomain_0&hash=item4165ad5315&nma=true&si=IRw0ktC0tcWrY7HtqiOa7grMwx0%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557)
-
That's why i said my designer is reworking it , so that it can be easily built.
It will be ready next week . When will yours be ready?
-
That's why i said my designer is reworking it , so that it can be easily built.
It will be ready next week . When will yours be ready?
When they are ready.
-
Became interested in the project however agree decrease of 10 "to 3". Send me by email that the Aventador. marcows_paulo@hotmail.com
-
http://www.ebay.com/itm/How-to-Build-a-Lamborghini-Aventador-Body-Replica-with-Bonus-Bugatti-Veyron-/281042686099?pt=US_Education_Language_Reference_Software&hash=item416f731093 (http://www.ebay.com/itm/How-to-Build-a-Lamborghini-Aventador-Body-Replica-with-Bonus-Bugatti-Veyron-/281042686099?pt=US_Education_Language_Reference_Software&hash=item416f731093)
What do you think?
-
MKS-BRAZIl, I bought those plans they are nice, and a good price.
-
Became interested in the project however agree decrease of 10 "to 3". Send me by email that the Aventador. marcows_paulo@hotmail.com
Quer compra planos do aventador?
-
Hi, I'm new here, not to long ago, I decided to do a project car, so was looking around the internet to see who might have a good set of plans, and I ran into this site and I see many enthusiastic people here that loves these cars. so I decided to join up. Anyhow I hope to get to know some of you on here and share ideas. if any here has info on a set of Lamborghini Aventador plans. please pm me. its nice to be here.
Best Regards.
John.
-
Welcome aboard Johnny, as you can see above plansforsale has a chassis plan, the body will be harder to find but its probably out there somewhere.
regards
Lambo
-
I have aventador build plan, %100 money back guarantee, cross sections and right sections,
-
Any of the currently available replica Aventador body kits is a bit different to each other, and obviously not perfectly following the proportions and shape OEM Aventador in most areas, so it's still unclear whether they could fit to some chassis or not, unless it's tested in real conditions. For example, Inspire composites kit could fit my real scale chassis if the former is being extended in several areas to make up for the slightly smaller scale it comes with. Done so will allow the body kit to get in proper size (length, width, height, wheelbase) and be easy to install on my Govedo chassis thanks to the use of several wooden mounting sections that I provide for free in the form of DWG files to any customer with Govedo chassis plans using this particular body kit. This video shows where the Inspire composites kit must be stretched in order to preserve the overall presence of the car and make the changes hard to notice.
https://www.youtube.com/watch?v=ip3866mlP_Q (https://www.youtube.com/watch?v=ip3866mlP_Q)
-
Hey everyone, i thought ide put this out there, and i know all of you are quite aware of this topic if it was ever brought up, I went into the (real lambo forums) and i wanted to see what these guys had to say on the fake replicas. (not that it matters) but how would you deal with people that actually owns the real deal??? they look down on you, this is what they had to say. please dont ask why i posted this here, im just sick and tired of the haters, i mean those who own the real deal, those who have the real dollars have more money then brains, they cant build, they only know how to open up there wallets,
1, Silly poseur!!!.......replicas are for losers!!!!!
2, Just remember quality over quantity!! lol.
3, Not that I want to make a broad statement here, but, the best replicar maker is one that does not exist. (scratch your philosophical head on that oxymoron)
4,Why the Fuk would someone want a fake? If you cant afford the real thing get a poster and buy a Corvette. This car was not made for everyone, that's what makes them special! I'm with Raymondo, I hope this thread gets killed. Sorry for the rant, I love the REAL THING!!
I just want to hear some of your opinions,
-
hi Jonny, Yep there are many haters on the real forums, but I have also found an equal number of guys that will help with measurements and detailed pictures, when they are restoring their real cars, they will not admit it on the forums but some of them don't have a lot of time for the real owners also, and some of them do respect us replica builders for having the skills we have, they just don't admit it openly. I think most of the serious haters don't want the value of their cars to be lost by rubbish replica builders, because joe public usually can't tell the difference when its a good replica build. I have seen some real rubbish replicas for sale and here is two that have appeared on our local Auction site in nz this week, I think the seller should be paying $3k and 4.8k for someone to take this rubbish for scrap, even I would not be paying either 3k or 4.8k for this rubbish. http://www.trademe.co.nz/a.aspx?id=955636714 (http://www.trademe.co.nz/a.aspx?id=955636714) and http://www.trademe.co.nz/motors/specialist-cars/other/auction-954065427.htm (http://www.trademe.co.nz/motors/specialist-cars/other/auction-954065427.htm)
The red body with square tube chassis shown but not available, a friend bought that 12 months ago, and I know the company that built those in the 1990's and it was a very good quality build, from the factory and the body was pretty close to the real thing, but it definitely did not come with a Corvette suspension when it left their factory
-
The only thing that matters is how you feel about your car!
No matter what you drive, real of replica or original design, somebody somewhere will hate on it.
If you like what you see when you look in the driveway THAT is all that matters!
Never forget to appreciate your haters, it means they noticed,and if you do ANYTHING that draws attention they will show up, personally I enjoy myself when they come out, ya gotta love that they are spending that energy on your behalf. ::headbang
-
I want to buy plans of the chassis and interior of the lamborghini aventador. Does anyone have any ready and 100% functional? ::salute
-
I have Aventador body sections, cross sections and right sections. let me know if you need it
-
Axelhleb, not sure what you mean by 100% functional, but I will try to help. Grabcad.com has several versions of the 3D modeling, all of them free.