Author Topic: OEM Interior trim measurements  (Read 9120 times)

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 449
  • Member Rating Points: +11/-0
  • Show me, don't Tell me...
Re: OEM Interior trim measurements
« Reply #23 on: February 12, 2014, 01:44:11 PM »
I am also interested in seeing that mount area.....

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 249
  • Member Rating Points: +19/-0
Re: OEM Interior trim measurements
« Reply #22 on: February 12, 2014, 03:20:35 AM »
Those are some fabulous pictures there Paul , very much much appreciated by myself and I'm sure by many other forum members.
Got a lot of brackets to make - once the weather picks up a bit..
Paul , would you be the fella who was doing a repair to the L/H/R chassis outrigger / oil cooler mount ? ,
 ::thumbup
Oooh , Red leather.

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1060
  • Member Rating Points: +28/-1
Re: OEM Interior trim measurements
« Reply #21 on: February 11, 2014, 10:02:17 PM »
Wow, rare pics! Very nice. Thank you!
If I don't have time to do it right, when will I have time to do it over?

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Member Rating Points: +2/-0
Re: OEM Interior trim measurements
« Reply #20 on: February 11, 2014, 09:55:40 PM »
more

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Member Rating Points: +2/-0
Re: OEM Interior trim measurements
« Reply #19 on: February 11, 2014, 09:53:35 PM »
more

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Member Rating Points: +2/-0
Re: OEM Interior trim measurements
« Reply #18 on: February 11, 2014, 09:50:20 PM »
interior mounting fittings and tabs, if anyone needs specific measurements let me know, Paul

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 249
  • Member Rating Points: +19/-0
Re: OEM Interior trim measurements
« Reply #17 on: January 07, 2014, 02:08:49 AM »
I do have the dash brackets , they should make it easier to mount.

I see the lower panel mount tabs welded to the steering mount beam , simple really...

Thanks for the pics.
Oooh , Red leather.

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 449
  • Member Rating Points: +11/-0
  • Show me, don't Tell me...
Re: OEM Interior trim measurements
« Reply #16 on: January 06, 2014, 06:54:00 PM »
i would like to know the measurement between the "steering mount beam" to the floor frame... just the space between, not including the frame thickness etc. thank you.. :)
« Last Edit: January 07, 2014, 01:49:57 PM by Digibeam »

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Member Rating Points: +2/-0
Re: OEM Interior trim measurements
« Reply #15 on: January 06, 2014, 05:18:48 PM »
do you have the side mounting brackets, its a while since i stripped mine and most of the brackets at moment are at the platers, i will get some proper pics of bare frame

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 249
  • Member Rating Points: +19/-0
Re: OEM Interior trim measurements
« Reply #14 on: January 06, 2014, 03:50:17 PM »
String, that interior and dash was the deal of the century if you need any pictures of pick up points and brackets, i have this bare original frame here, its LHD but you should be able to flip the measurements for the other side.
That is very kind of you - it is just a case of right place / right time  :). I think you will find the offer of close up frame pictures would be welcomed by most forum members , and I for one will find the offer an invaluable resource i'm sure. I would start off by asking if a picture of the 'lower dash panels' lower mount brackets - both sides would be available , the upper mounts of these parts bolt to the dash directly and it seem the bottom ends bolt to somewhere near the steering column mount beam.Actually any trim panel mount hole for the push in clips would be helpfull. Thanks in advance , string.
( Looks like a 2005 vintage vin no. in your login name..)


Unfortunately , no , not at this time , they are a just a car dismantling group and it is a case of whatever comes in.
Cheers.

String,

Would your source have a complete diablo interior?
Oooh , Red leather.

AdrianBurton

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 408
  • Member Rating Points: +19/-0
Re: OEM Interior trim measurements
« Reply #13 on: January 06, 2014, 10:40:43 AM »
String,

Would your source have a complete diablo interior?

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 449
  • Member Rating Points: +11/-0
  • Show me, don't Tell me...
Re: OEM Interior trim measurements
« Reply #12 on: January 05, 2014, 08:32:55 PM »
@LA12241... are you making a build with the frame?   if you have photos that would be cool... then any measurements if you dont mind helping out, could be asked by circling a section of the image etc.
just my thoughts...  :)
« Last Edit: January 06, 2014, 11:44:59 AM by Digibeam »

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Member Rating Points: +2/-0
Re: OEM Interior trim measurements
« Reply #11 on: January 05, 2014, 02:55:47 PM »
String, that interior and dash was the deal of the century if you need any pictures of pick up points and brackets, i have this bare original frame here, its LHD but you should be able to flip the measurements for the other side.

Tallon

  • Trade Count: (+4)
  • Hero Member
  • *****
  • Posts: 1257
  • Member Rating Points: +18/-5
Re: OEM Interior trim measurements
« Reply #10 on: January 02, 2014, 01:48:21 PM »
:\ mainly talking about sill trim, rear interior trim

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 449
  • Member Rating Points: +11/-0
  • Show me, don't Tell me...
Re: OEM Interior trim measurements
« Reply #9 on: December 31, 2013, 03:44:42 PM »
Tallon has hacked versions of what was once OEMish...
i actually have them and have been bringing them back to life in my spare time, as we both know how much i have of that....
they also had a rather colorful history attached to them but i have stripped pretty much all of what was once lumpy taped versions to what will become new smooth parts. good memory...
do you remember me at all?