Author Topic: Diablo Hauler reccomendations  (Read 1710 times)

schroke

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 6
  • Liked: 6
  • Member Rating Points: +1/-0
Re: Diablo Hauler reccomendations
« Reply #7 on: December 09, 2018, 09:16:44 PM »
This is a great idea.  I have only 1.5" clearance on each side of the trailer fender covers.  I picked up a 24' covered trailer last month.  I'll be making the ramps next!

-Ken

CCIE

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 465
  • Liked: 96
  • Member Rating Points: +12/-0
Re: Diablo Hauler reccomendations
« Reply #6 on: August 11, 2018, 06:18:50 PM »
Thanks every one for responding!!!

RT... Love your Hauler and your idea. specially the fact trying to get under the Diablo!!! Thank You

Any one has one for sale by chance????

CCIE

autopro

  • Lambo Mafia
  • Administrator
  • Trade Count: (+28)
  • Hero Member
  • *****
  • Posts: 1425
  • Liked: 1204
  • Member Rating Points: +43/-1
  • Tijuana/San Diego
Re: Diablo Hauler reccomendations
« Reply #5 on: August 09, 2018, 09:24:10 AM »
Great trailer and the ramps are awesome.
Pedro

RT

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 410
  • Liked: 308
  • Member Rating Points: +28/-0
Re: Diablo Hauler reccomendations
« Reply #4 on: August 08, 2018, 07:14:42 PM »
I have an 8+ x 20 ft. enclosed trailer for my Diablo.  (They aren't really 8.5 wide, closer to 8'-3" and less inside)

Because the Diablo is so wide, I made ramps to keep the sides clear of the inner wheel housings AND to make it easier to attach the tie-down straps.  Remember these cars are VERY low and if they sat on the floor, it would be hard to hook them underneath.
Check out these pictures:

By the way, the tape strips you see on the door/ramp help align the car to center by representing the outside of the rear wheels.  So when I load the car, I just keep the rear wheels aligned to the tapes and winch it in.  Also, load Lambo backwards because you need tongue weight for the trailer to tow correctly.  The engine in back is your heavy end just like the engine up front is the heavy end of a front engine car.
« Last Edit: August 08, 2018, 07:39:26 PM by RT »
It isn't enough to want a Lambo, you have to want to BUILD A CAR.

italianknightrider

  • IKR
  • Trade Count: (+7)
  • Hero Member
  • *****
  • Posts: 654
  • Liked: 79
  • Member Rating Points: +36/-2
  • LAMBOCLONE MAFIA - Administrator / Owner
Re: Diablo Hauler reccomendations
« Reply #3 on: August 08, 2018, 06:25:53 PM »
I would definitely go with the 8.5 width on the trailer size.  If your Diablo is close to factory specs you will need the room.  The rear width on my was around 80".  Hope that helps.  Good luck!

i agree get one with no side rails ,just a front rail cap across the front of the trailer ......... for a open trailer , enclosed trailers will be more expensive
« Last Edit: August 08, 2018, 06:27:56 PM by italianknightrider »
We hope our post help someone finish their build or get them interested in our hobby and start a build.

JJS SE30

  • Trade Count: (+3)
  • Full Member
  • ***
  • Posts: 119
  • Liked: 19
  • Member Rating Points: +3/-0
Re: Diablo Hauler reccomendations
« Reply #2 on: August 08, 2018, 06:03:48 PM »
I would definitely go with the 8.5 width on the trailer size.  If your Diablo is close to factory specs you will need the room.  The rear width on my was around 80".  Hope that helps.  Good luck!

CCIE

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 465
  • Liked: 96
  • Member Rating Points: +12/-0
Diablo Hauler reccomendations
« Reply #1 on: August 08, 2018, 05:56:59 PM »
Builders and Owners

What type of trailer do you us to haul your Diablo?
Would a 6.5 ft wide by 16 long work for open hauler
Would 8.5 x 20 work for a enclosed hauler?

Anyone has one for sale?

CCIE