LamboClone - The Premier Site for Lamborghini Replica Builders
Build Diaries => Aventador => Topic started by: aventcar on January 20, 2018, 02:14:46 AM
-
Based on the traditional GM stretched frame and with almost all detailed and complete interior and separately body accessories with especially attention on doors details with the glass installed
-
Firts i need to prepare the Fiero GT for make the correct cut on the chassis
-
We need cut the chassis in the correct place
-
Removal of the engine/trans is usually necessary in order to do proper welding on the stretch joints. Did you cut the cradle also? Some have left the cradle intact and installed a new crossmember to which the cradle mounts to at the front. Your choice of many options.
01
-
no problem I have done it before and it has given me the correct alignment, but if it is a good point for beginners and so it would start with good precautions .im been builded cars with xtreme chassis conditions like this f50 with stretched frame or murcielagos.
-
A good chassis alignment is nesesary to make this steep
-
::thumbup :CSS
-
You're really moving along Carlos, good job brother ::beers
-
::thumbup thanks brother
-
Ready to install the gear stiks for the robot speed selector so tomorrow will be another day
-
The goal of this build daires is to help some people here that have a fiero GT and they want to build your aventador kit on a fiero stretched frame so next days i go put detailed pictures abouth the stretched frame
-
Today its the day also to install new hoses,,and modify some pipes.
-
Today ,gear speed sticks pads installed ,,will be tested when the body on chassis be installed.
-
Now is time to install the body on the stretched GM frame. :LL:
-
Looking good. I should have bought my Aventador body from you instead of carkitinc!!!
-
Here another day on this adventure
-
The body on chassis will ready and alligned today
-
That's great Carlos, when do you think you will be able to hang the doors?
-
Next week pedro ::thumbup
-
This is the result of the good and aligned fiberglass parts with correct fitment specially in doors fiberglass parts ,today when the sun fall i gona have two doors intalled
-
Two doors ready ,with latches working ,so i go wait some days to install the rest of parts to open outdoor and indoor ,,by now i using a small cable to open the doors inside the car.
-
Forget put under back the steering wheel shifters pads switches neccessary for the robotic assist automatic speed selector
-
GO CARLOS!
-
GO CARLOS!
::thumbup
-
That car sure looks accurate, great job sir! can i ask what motor you have in it and how much you would sell it for if you were going to sell it? Thanks :)
-
2.8 v6 for now , and by the moment i don't have price ,i need to see the time and build costs factor ,so let me some time when the car almost finished i gona have the price for sure :)
-
Now is time to install the rear hood
-
Are you intending to sell this project ? would be interested in final price forsure ;)
-
Are you intending to sell this project ? would be interested in final price forsure ;)
altough the intention of this build dairy is to prove that my kit is a good kit to build a turnkey with the real car appearance ,and regarding with your question mr Lucky maybe yes ,would have this car for sale.
-
For now a have intalled the hinges this en of week i gona sleep ::zzzzz but tomorrow will be another day ::sun.
-
Rear hood installed today
-
Very nice fit!
-
I was thinking the same thing, looks like they just fall together. When you're good it looks easy.
-
is the result of getting good parts of the molds , and result in good forward time when building a turnkey
-
Now is time to install rear bumper today
-
Install the steel hardware is neccessary,and today will be ready installed the rear difusor with the 4 pipes.
-
We can use same fiero pipes to conect the same mufler
-
Trust me..... You don't want to install the pipes soo close to the fiberglass body panels... Your rear end will catch on fire. (not the ghost pepper fire... far worst) I put heat shield in my Diablo from a Ferrari and wrap the tubes in heat wrap and even with that I smell that crazy smell of fiberglass burning, my pipes dont touch the fiberglass. Before the heat shield I would see smoke.
Just my .0002C
CCIE
-
To begin with, they are in a big mistake, because between the pipes and the fiberglass piece there is thermal insulation and they are not close enough to cause a fire, that's what I have proven for years in two vehicles in a ferrari f50 replica and a lambo murcielago,i can prove when make the fist test also without the thermal insulation i have enough experience for years.
-
ok if it works fine,but im not familiar with Murcie or Aventador exhaust but where do you or they do mount the flex . does the exhaust flex when you accelerate hard ? on Diablo the muffler has two double springs mounted on chassis for flexing. actually Murcie too to my observation on pictures.
-
Almost done :CSS the good thing was the same body of the video, the changes on the paint was cause im used the same body to make the convertible molds ,but the body surface still in excelent condition for paint aplication.
-
Next week maybe video of the car runing on the street making the first test with the lights working
-
Next week maybe video of the car runing on the street making the first test with the lights working
Great progress!!
-
Thank you very much, I have been putting a lot of effort since I started to make the kit for the first time, the good thing that with a good kit is reduced the time of making a turn key.
-
8)
-
U sir, are a very talented !!
-
:D ;D thank you very much sir
-
We go fast with this build but ,after we go explain some details abouth this build to help who want build a car with this kit based on 1995 to 1998 GT GM .
-
OMG Carlos! I'm sick of you! I can't afford it but I want one !!!
-
Its not all ready but i making my first test on the street working today ::headbang
-
OMG Carlos! I'm sick of you! I can't afford it but I want one !!!
thank you very much ::thumbup
-
Just beautiful Carlos
-
Thanks brother :D
-
New youtube video my build running on your first test working on the street , still some details on it ( without paint ,and need some mechanical adjustments) soon this car will be finished.
https://youtu.be/fvE6xLlep60
-
Does this link work for everybody else? It doesn't for me.... :(
-
This one works: https://www.youtube.com/watch?v=fvE6xLIep60 (https://www.youtube.com/watch?v=fvE6xLIep60)
-
Thank you very much supercobra :LL:
-
Any plans do a SV front bumper ? They make the car look lower and better
-
Such great work Carlos ::salute
One of these days I need to make it out there to check it out, you are only a couple of hours away from me.
-
Thanks autopro im here working when you want ::wave
-
Any plans do a SV front bumper ? They make the car look lower and better
yes Tusabes is to easy for my now buld sv bumper ,, after i have complete all interior elements( center console and buttons center rear mirrior, door glasses elevator mechanisms ) of the first and basic model .so i go start to build those SV and 2018 S model
-
Beautiful work! I am jealous. ::rocker If you need the solid model for the SV front and rear, I can send you my versions.
-
Thank you very much jealous ::wave , i have all abouth sv model ,,at this moment im building a turnkey with all old parts from the first model and i have doing one tink at time , and congratulations for your effort and work ::thumbup
-
Long time that i no put updates ;D i have almost all but some things happening with me this summer ??? ;Dso i go assemble all parts to have ;D to have done
-
Beautiful!
-
Thanks footcutter :)
-
Very nice Carlos.
-
Thanks brother ::thumbup
-
I can't tell the quality of your build by the small pictures. NOW, if you were to LOAN your car to me for a week or so, I would be in a better position as to whether to give it a thumbs up or not. ::headbang ::bounce :drool :drool :drool ::thumbup
01
-
I can't tell the quality of your build by the small pictures. NOW, if you were to LOAN your car to me for a week or so, I would be in a better position as to whether to give it a thumbs up or not. ::headbang ::bounce :drool :drool :drool ::thumbup
01
::beers soon i go get new pictures of every angles of the car by now i have only of the main the doors.
-
:)
-
Upholstery on doors before to be installed
-
::thumbup Thanks!
-
how much are you selling your complete kits for?
-
how much are you selling your complete kits for?
$ 16 k full parts with lighs included ( main body wth accessories, complete interiors , set of glasses , doors hood and trunk hinges.
-
I almost ready for new video
-
Here another picture from back for demostrate that my kits assemble very well without extra works included all interiors.
-
this is amazing carlos cant wait to see the finished product
-
Very nice job!
-
Wow! Nice!
-
::rocker Awesome!
-
Thank you very mich every body for push emotionally :) im very excited on my last stages of my project.
-
Beautiful. Can't wait for video!
-
Here a previouly video for a finally video : https://youtu.be/yOMllLFDwV8
-
https://www.youtube.com/watch?v=y0MllLFDwV8 (https://www.youtube.com/watch?v=y0MllLFDwV8)
-
Soon i go have new updates abouth my build