The Forum > Lessons Learned - Advice to Newbies

Replicate cast aluminum

(1/1)

RT:
Bartman...
I checked out Eastman Aluma blast.  It appears that is a finish to restore the color and protect the surface of existing aluminum.  Sounds good but I couldn't find anywhere that it creates the texture of cast aluminum.  A good product I'm sure because Eastman makes good stuff.  I just took a shortcut to create the texture of sand cast aluminum on regular sheet steel.  It is just a way to cheat the eye into thinking it is cast aluminum.
The part and manifold in my pictures were both painted with the Krylon metallic paint spray can shown so they appear as one.

RT

Bartman:
I've used Eastwood aluma blast for many years, probably 25 or more. Great idea about adding texture.  Eastwood also has finishes to look like cast iron and others.

eddie:
Cool , thanks for sharing

RT:
Hey guys...
When making my build I wanted to add a cover to the rear of my intake manifold to hide a block-off plate for the EGR port.  I could have just fabricated a sheet steel cover and painted it but it would still stand out as a cover.  I found a way to paint the steel fabricated cover and make it look like the cast aluminum intake.
First make your cover and body work it with radius edges and fillet corners so it looks like it could be a casting.  Then prep it for paint and paint it with Rust-oleum Multicolor textured paint.  I know, it is the wrong color but hang on.  The texture is identical to cast aluminum.  When dry, paint over it with metallic paint (or the color you used to paint your manifold or whatever you are trying to match). The result is cast aluminum.  See attached pictures.

Navigation

[0] Message Index