LamboClone - The Premier Site for Lamborghini Replica Builders
How To - Tips => Steering / Suspension => Topic started by: String on April 11, 2015, 04:00:59 PM
-
Is anyone able to give me the dimension of the rear wishbones on a Murcielago , inner to outer mount centres .
Thanks,
::help
-
Neil, do you need the measurements including the bushes, original ones have spacer shims to take up the slack in the mounts on the frame,Paul.
-
::wave
Hi ,Paul ,
The distance between the Red lines , the depth of the wishbone I suppose . From centre to centre - innermost to outermost , although the outer most width of the hub between the bushes would be a bonus :)
All and any help appreciated .
regards, Neil
Thanks
-
dimensions for arms with out without bushes, the rear hub is 11cm top and 12cm bottom,but the hubs have spacer shims inbetween the bushes so there may be a slight toerance with the dimensions, Lamborghini list shims from .05 to 2mm
-
That's great stuff there Paul , thanks . I am being unclear though as I wanted the distance between the red lines or the 'Length' of the wishbone , which is from the inner-most centre line to the outer-most centre line . :)
Also I am all about Metric :LL:
-
::tongue here you go 395mm lower 250mm upper.
-
::wave
That is all very kind of you and just the ticket , thank you very much indeed.
::beers
-
Hi Paul, Are these OEM or replica arm measurements, and would you also have the fronts available as well, I am looking at fitting to a Naerc frame.
Best Regards
Graeme
-
Hi, yes OEM arms, do you want similar measurement points.
-
::tongue here you go 395mm lower 250mm upper.
Hi Paul the same as you did for the rear would be great, I don't suppose you have any detail of the uprights also a pic of those also with even basic measurements would help a lot, I have been working from the Diablo 6 manual but the Murchie stuff is a much later design and the one I would prefer to use, have you or anyone else come across a Murchie manual with the detail the Diablo 6 manual has.
best regards
Graeme
-
quote:Hi Paul the same as you did for the rear would be great, I don't suppose you have any detail of the uprights also a pic of those also with even basic measurements would help a lot, I have been working from the Diablo 6 manual but the Murchie stuff is a much later design and the one I would prefer to use, have you or anyone else come across a Murchie manual with the detail the Diablo 6 manual has.
best regards
Graeme
Hi Paul, have you had a chance to look at the fronts for me.
Best Regards
Graeme