LamboClone - The Premier Site for Lamborghini Replica Builders
Build Diaries => Diablo => Topic started by: minihawn on November 11, 2015, 09:11:13 PM
-
Would like to know what are good latches to use for the Diablo roadster ..thanks
-
http://m.ebay.com/itm/PAIR-OF-PROTEX-ADJUSTABLE-LATCHES-AND-CATCHES-WITHSAFTEY-CATCH-71-653M1MSZN-YP-/201222971524?nav=SEARCH (http://m.ebay.com/itm/PAIR-OF-PROTEX-ADJUSTABLE-LATCHES-AND-CATCHES-WITHSAFTEY-CATCH-71-653M1MSZN-YP-/201222971524?nav=SEARCH)
-
do these allow me to attach on rear?thanks Rod
-
Not on the engine lid,you'll need different set up.
Since the one from NAERC are no longer avail
Must mod something else.
-
Get the hood latches , cable & pins from a mid 2000 saab 9 series. The hood use a bullet style pin . Use these on the rear of the car and decklid. The other protex latches are for the front. You ll also need a seperate slim pin only for the front too! You have to weld a piece of round tube to the front roll bar next to latches. Look at pics I f how lamborghini did it and this will make some sense
-
awesome ! 8)
-
I'm using ( not installed yet) Pontiac Soltice or Saturn Sky same sh t convertible top latches that are on rear deck , they also have chrome bezel that mounts on top of the lid, not expensive I think I paid like 100$ for a set incl, bezel brand new GM. oh the right side latch has different mounting so I got both LH.
-
I'm using ( not installed yet) Pontiac Soltice or Saturn Sky same sh t convertible top latches that are on rear deck , they also have chrome bezel that mounts on top of the lid, not expensive I think I paid like 100$ for a set incl, bezel brand new GM. oh the right side latch has different mounting so I got both LH.
Interesting! Thanks bud
-
This is what was used in the Diablo Roadster but there are other ideas as well:
For the front of the roof/windshield pillars (there is also a set of clips and bracket as well in the front of the roof)
(http://myfiero.com/uploads/31946_.jpg)
For the Roof and the engine bonnet:
(http://myfiero.com/uploads/31947_.jpg)
NEARC's Blue Roadster
(http://myfiero.com/uploads/31961_.jpg)
(http://myfiero.com/uploads/31962_.jpg)
The pins are mounted on the roof and as you can see the latches are on the engine bonnet. You push the roof on the engine bonnet and it will latch on, same if you put it on as a roof, push to latch on, to release the roof you use the handle, the latches are spring loaded. Almost like OEM, make a cover box and cover the latch on the engine bonnet like OEM. You can even use 2-WIRE ACTUATOR to control the latches electronically...
I have them :)
CCIE
-
This is what was used in the Diablo Roadster but there are other ideas as well:
For the front of the roof/windshield pillars (there is also a set of clips and bracket as well in the front of the roof)
([url]http://myfiero.com/uploads/31946_.jpg[/url])
For the Roof and the engine bonnet:
([url]http://myfiero.com/uploads/31947_.jpg[/url])
NEARC's Blue Roadster
([url]http://myfiero.com/uploads/31961_.jpg[/url])
([url]http://myfiero.com/uploads/31962_.jpg[/url])
The pins are mounted on the roof and as you can see the latches are on the engine bonnet. You push the roof on the engine bonnet and it will latch on, same if you put it on as a roof, push to latch on, to release the roof you use the handle, the latches are spring loaded. Almost like OEM, make a cover box and cover the latch on the engine bonnet like OEM. You can even use 2-WIRE ACTUATOR to control the latches electronically...
I have them :)
CCIE
I need these, how much and when can I buy?
-
I'm using ( not installed yet) Pontiac Soltice or Saturn Sky same sh t convertible top latches that are on rear deck , they also have chrome bezel that mounts on top of the lid, not expensive I think I paid like 100$ for a set incl, bezel brand new GM. oh the right side latch has different mounting so I got both LH.
Would u have a link on where to find them . I'm having trouble , as I don't know what there called
-
if you need to call GM parts Bezel emblem 1529357
Latch is 15806629 special order only come from US. need pictures , I'll post it . on ebay or junk yard they pop up but very rare.
https://www.youtube.com/watch?v=nqh7yAWpOWI (https://www.youtube.com/watch?v=nqh7yAWpOWI)
-
I'm using ( not installed yet) Pontiac Soltice or Saturn Sky same sh t convertible top latches that are on rear deck , they also have chrome bezel that mounts on top of the lid, not expensive I think I paid like 100$ for a set incl, bezel brand new GM. oh the right side latch has different mounting so I got both LH.
Would u have a link on where to find them . I'm having trouble , as I don't know what there called
:)
-
Homework time. Know what you are buying before the purchase. Do you want the roof latches or do you want the storage latches? How do they work? What am I going to have to do to my body in order to install these latches? Will I have to modify the latches in order to operate correctly? How will they look after the installation? Look at another Roadster or a build diary to see how another builder did it. Expect to pay $$$$ for parts.
-
::scratch
-
If I were you, I would look into a corvette salvage yard, and take the parts off a corvette that has a removable top; and graft them onto your project.
-
If I were you, I would look into a corvette salvage yard, and take the parts off a corvette that has a removable top; and graft them onto your project.
::thumbup
-
this is how I'm going to do interior front windshield pillar Camaro T bar receivers rear interior Protex Latches
top will have those bullet pins loose not latched , tie down with protex. engine lid L S/S brackets with rubber grommet size of the pin. slide in and latch with GN part. The GM latches are very small 3" long 3/4" high. very easy to open with out big force like hood latched . I've seen it on other car and it worked.
Jim Dinner used a Miata latches on his red Roadster, bottom line since NAERC parts are no avail use what ever works
I have A few ideas. Thank u for being specific. I'm also still struggling finding door glass