LamboClone - The Premier Site for Lamborghini Replica Builders

The Forum => Housekeeping - Forum Tips & Announcements => Topic started by: 01Lambiero on January 24, 2020, 10:40:13 AM

Title: How to orient pictures prior to posting them on Lamboclone
Post by: 01Lambiero on January 24, 2020, 10:40:13 AM
How to orient your picture before uploading it to Lamboclone.  Open Windows Explorer>   "Click" on the letter of your harddrive that has your pictures on it>    "Click" on the "folder" that has your pictures on it>    "Right Click" on the picture file and select "Preview">    At the bottom of the picture, you will see 2 circle arrows (one for counterclockwise and one for clockwise.  Click on the arrow for the direction that you want the picture to rotate to.  Done

01 Jim
Title: Re: How to orient pictures prior to posting them on Lamboclone
Post by: RT on January 24, 2020, 09:25:38 PM
Quote from: 01Lambiero on January 24, 2020, 10:40:13 AM
How to orient your picture before uploading it to Lamboclone.  Open Windows Explorer>   "Click" on the letter of your harddrive that has your pictures on it>    "Click" on the "folder" that has your pictures on it>    "Right Click" on the picture file and select "Preview">    At the bottom of the picture, you will see 2 circle arrows (one for counterclockwise and one for clockwise.  Click on the arrow for the direction that you want the picture to rotate to.  Done

01 Jim

I'd add to that SAVE the picture before you leave.
Well done Jim.
Title: Re: How to orient pictures prior to posting them on Lamboclone
Post by: Simple Man on January 25, 2020, 02:39:23 AM
Quote from: 01Lambiero on January 24, 2020, 10:40:13 AM
How to orient your picture before uploading it to Lamboclone.  Open Windows Explorer>   "Click" on the letter of your harddrive that has your pictures on it>    "Click" on the "folder" that has your pictures on it>    "Right Click" on the picture file and select "Preview">    At the bottom of the picture, you will see 2 circle arrows (one for counterclockwise and one for clockwise.  Click on the arrow for the direction that you want the picture to rotate to.  Done

01 Jim

but how do I get my door latch to meet up with the striker , add a couple of shims or rotate clockwise and add a 1/8 inch shim, after adding 3/16 of CSM anf then sanding down to 3/32 plus a primer sealer coat. ?   :LL:  ::scratch ::study ::help
Title: Re: How to orient pictures prior to posting them on Lamboclone
Post by: 01Lambiero on January 25, 2020, 09:42:40 AM
Simple: Install the striker on the quarter panel, install the latch in the door, SLAM the door, OPEN the door and REPAIR, GRIND, KITTY HAIR, BONDO, etc. all areas where you can see any damage.  Post pictures straight up with the floor on the bottom.  (large crowbar may be needed to open door)  ::thumbup ::bounce ::headbang
01