LamboClone - The Premier Site for Lamborghini Replica Builders
Build Diaries => Diablo => Topic started by: fastbusa on March 24, 2013, 07:04:14 PM
-
I have a roadster that im working on...It came with the 60 rear lights and the bezels i have are way to big for the lights...Which lights would i need to use to get the correct fit and look...thanks
-
Have you tried google.com "Images"?
-
yep but figured somone on here would give me some info....do you know what i need..
-
I think that earlier Diablos had the larger taillights with 2 screws on the lens. The 6.0 has the smaller ones with 3 screws on the lens. Depending on the model, the taillights utilize different light assemblies and locations. Hope this helps. You can buy oem style small taillights from Susquehanna at www.rallylights.com/detail.aspx?ID=2333 (http://www.rallylights.com/detail.aspx?ID=2333) for about $40 ea. I don't know where you can purchase the larger lights.
Jim
-
thank you for that info...I have a couple sets of lights but it just seems my bezels look kinda large compared to the oem lights i have...they have 6 inch hole instead of 5..
-
You are looking for 140mm diameter lights. Lamborghini lights from the factory used COBO.
The 6.0 used the 123mm diameter lights.
There is a COBO distributor in Iowa. Phone: 319-754-5585
http://www.cobo-group.com/eng/product/detail/02.1089.0000 (http://www.cobo-group.com/eng/product/detail/02.1089.0000)
You want the yellow lamps to be single function (1156 bulb)
You want the red lamps to be multifunction (1157 bulb)
Yellow housing # 02.282.000 LH - RH - Yellow lens #02.282.011
Red housing # 02.279.000 LH - RH - Red lens #02.279.011
-
thanks for so much info...
-
I fastbusa, do you have found a solution about your diablo taillights?
Envoyé de mon iPhone en utilisant Tapatalk