Author Topic: Fues Layout on a NAERC Chaise  (Read 772 times)

eddie

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 628
  • Member Rating Points: +14/-2
Re: Fues Layout on a NAERC Chaise
« Reply #6 on: April 09, 2017, 05:49:04 PM »
Yusha once you locate the box use test light one after one fuse, it should tell you. ( with ignition power on)  you may have also Chinese relay gone.  ::scratch

CCIE

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 316
  • Member Rating Points: +5/-0
Re: Fues Layout on a NAERC Chaise
« Reply #5 on: April 09, 2017, 12:50:08 PM »
Eddie,

Thank You Man...
So if you blow a fuse how do you intend to change it. I have no clue which fuse is for the windows and I can barely reach in there with all the carpeting and upholstery in the way, let alone see anything. How would one determine which specific fuse is blown? Was this design to fracking frustrate people after it was completed????
I don't like the design..... and will have to move the fuse block somewhere accessible. I cant even imagine the work involved

Thanks again Eddie.... By the way how is your build coming

Thanks
CCIE

eddie

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 628
  • Member Rating Points: +14/-2
Re: Fues Layout on a NAERC Chaise
« Reply #4 on: April 09, 2017, 10:07:40 AM »
RH side bellow the Relay switches ( pasenger left kick side)
here is my NEARC chassis picture

CCIE

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 316
  • Member Rating Points: +5/-0
Re: Fues Layout on a NAERC Chaise
« Reply #3 on: April 09, 2017, 08:05:39 AM »
Thanks Eddie,

Is the pic showing in the Driver side, Passenger side or right in the center.
The car is completed with upholstery so how by design one access the switches?
I see no access panels in the front.

CCIE
« Last Edit: April 09, 2017, 08:08:13 AM by CCIE »

eddie

  • Trade Count: (+2)
  • Hero Member
  • *****
  • Posts: 628
  • Member Rating Points: +14/-2
Re: Fues Layout on a NAERC Chaise
« Reply #2 on: April 09, 2017, 04:44:50 AM »
this is JD's  picture .I too have same location but some have it in front hood under the Master/clutch 

CCIE

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 316
  • Member Rating Points: +5/-0
Fues Layout on a NAERC Chaise
« Reply #1 on: April 09, 2017, 01:05:56 AM »
All.....

Where would the fuses be on a NAERC Chaise (NAERC Diablo 60 with a 3800 SC)
Looks like I blew the fuse for the windows. The glass wont go up and down. Any assistance is greatly appreciated


Thanks
CCIE