LamboClone - The Premier Site for Lamborghini Replica Builders
How To - Tips => Rims & Tires => Topic started by: Lambolegend on May 04, 2020, 12:53:58 PM
-
Hi guys,
Had an unfortunate incident whereas one of my rear rims broke.
The garage I had to bring it to, says it's not repairable. Anyone know where I could find a replacement n Canada or delivered to Canada?
Thanks for any help.
-
who is the rim made by?
-
Diameter, width, offset, one-piece or three-piece?
01
-
It's a NAERC replica one piece. 18" accomodates 335/30ZR18. I'm not sure on the rest of the info. The car was towed to a local shop not in my town. So it's a half hour drive to find other information.
-
It's a NAERC replica one piece. 18" accomodates 335/30ZR18. I'm not sure on the rest of the info. The car was towed to a local shop not in my town. So it's a half hour drive to find other information.
You will also need to know your bolt pattern as well. Is your replica Fiero based or NAERC Chaise based.Another words are your Rims 5x100 (Fiero) or 5x112 (Lamborghini) or 5x4.75 (5x4.75 or 5x120) This is Corvette. I might have a spare somewhere, I will check when I go to my where-house.
I would contact Ron from Ron's Toy store. He is a good friend and very reliable and trustworthy, He is in Vancouver, CA
CCIE
-
One other thing to note.... The replica wheels are near impossible to get these days.
-
Ron info. He is a member here. His contact info is ronlambo@shaw.ca.
CCIE
-
Thanks guys,
I have been in contact with Ron, he actually has one listed on eBay. We are just trying to determine if it's the right one. It is fiero based.
-
Well some more bad luck.
Ron's rim is 5x120mm and I would need 5X100mm. He suggesting perhaps a wheel adapter if I can't find another wheel. Let me know please.
@CCIE "I might have a spare somewhere, I will check when I go to my where-house."
-
You could also have the bearing re-drilled but then you are unable to swap sides anymore, but you would have the same offset, because the spacer would change the track width
-
are you sure is 5 X 100? Joe said he does not remember what is on but all parts suspension was bought from States. double check
-
Mechanic where the car is sitting said he triple checked. It is 5x100.