Plastic murice head light lenses wanted

[Digibeam]

I have mounted the OEM lens in my G28 fenders, you will have to cut out to the body line on outside edge and on the driver side relocate the body line as it is a bit off
It's worth the effort and by far the finished product will visually speak for itself

I have also just sent full payment for two sets of headlamp lens...

[Texas]

I'm in. Payment sent. Thx

[lambocars]

hello there managers and 10 sets ...
can make full payment if you wish ..
sending'll do the week of 01/08/2014.
paypal acount...joseortiz_27@hotmail.es
115 dollar set...plus shipping

[Tallon]

I believe there is some pics in usmcbutler's build diary with the glass version installed
A lot of people go for the flat lens but they usually have a black outline around it where it mounts. It all depends if you're happy with how it looks in your build, also your budget and patience I guess.

Not sure what you mean by the edge of the lens, the base of the lens goes below the body. In that picture he posted it's a negative (mould) of the lens or it's upside down, however you want to look at it.

[Fatboyslim]

ok i understand, but looking at the exterior edgeline of the lens runs directly on top of the bodyline / curve of the fender and any cuts or modification will directly effect the bodyline of the fender. not much room to modify at all, do you have any pics one already done? im just worried that i will mess up the look of the front end  for G28 do you think its better to stick with a mark clapp flat lens and trim to fit? Thanks

                                                      Randy

[Tallon]

you have to trim the fender some and make it fit
ever notice the opening doesn't go to the body line like oem
so it's for the best

[Fatboyslim]

Will these fit on a G28? if so im in for 2 sets immed. 

[Digibeam]

I don't need a set as I bought the glass ones from bierhansel.
But after buying the engine hatch hinges and seeing the incredible work. I am in for a set for sure as well...

Actually, I will take two sets... No questions.

[lambocars]

hi, if it is equal to oem,
a friend left a game to make the mold, I think were FGP.composites.
Approx 15 days, when everyone pays.

[BigPines]

Are these OEM spec? What is the source of the mold? What it the estimated delivery once everyone pays?

[lambocars]

I am using a translator ... my English is very bad.
who wants a set please contact by private for payment instructions.
when you reach the 10 sets I send to manufacture.
must make 50% of the payment as a reserve.
when ready for shipment the other half sought payment costs more spending

[nickmkk]

I will buy a set

[lambocars]

I have shown the initial mold.
so they will be seen ...
A copy of this mold will be made of aluminum for thermoform.

[Tallon]

Aren't you 1 of 10? If not this means you have a lens for yourself to show?

[lambocars]

this is an example of the first mold.
Here you can get an idea of ​​how the finished piece will be