Author Topic: Aventador side glass outline  (Read 1390 times)

Footcutter

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 245
  • Liked: 142
  • Member Rating Points: +11/-0
    • 3D car printing
Re: Aventador side glass outline
« Reply #7 on: June 17, 2019, 10:37:17 AM »
I measured the curvature to be 600mm radius.

redewaan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 18
  • Liked: 1
  • Member Rating Points: +0/-0
Re: Aventador side glass outline
« Reply #6 on: June 17, 2019, 09:31:38 AM »
I just want to use it in cardboard to check the curve of the and the front pillar. I'm going to build my own body and need these to do checking. Thanks

Neils88

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 249
  • Liked: 134
  • Member Rating Points: +2/-0
Re: Aventador side glass outline
« Reply #5 on: June 17, 2019, 09:24:22 AM »
You'll need to take into account the large amount of curvature in the glass...

Footcutter

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 245
  • Liked: 142
  • Member Rating Points: +11/-0
    • 3D car printing
Re: Aventador side glass outline
« Reply #4 on: June 17, 2019, 09:21:27 AM »
I have it for the OEM door glass, but not the quarters.

redewaan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 18
  • Liked: 1
  • Member Rating Points: +0/-0
Re: Aventador side glass outline
« Reply #3 on: June 17, 2019, 04:33:17 AM »
Hi footcutter actually both.

Footcutter

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 245
  • Liked: 142
  • Member Rating Points: +11/-0
    • 3D car printing
Re: Aventador side glass outline
« Reply #2 on: June 16, 2019, 12:45:16 PM »
Door, or quarter glass?

redewaan

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 18
  • Liked: 1
  • Member Rating Points: +0/-0
Aventador side glass outline
« Reply #1 on: June 16, 2019, 07:41:01 AM »
Hi all. Do any one perhaps have the side glass profiles of the Aventador for me please. I want to print it and then cut from cardboard to check.. Many thanks redewaan@hotmail.com