Build Diaries > Diablo

diablo roadster rear lights question

(1/2) > >>

Mr2trd:
I fastbusa, do you have found a solution about your diablo taillights?


Envoyé de mon iPhone en utilisant Tapatalk

fastbusa:
thanks for so much info...

jdinner:
You are looking for 140mm diameter lights. Lamborghini lights from the factory used COBO.
The 6.0 used the 123mm diameter lights.
There is a COBO distributor in Iowa. Phone: 319-754-5585
http://www.cobo-group.com/eng/product/detail/02.1089.0000

You want the yellow lamps to be single function (1156 bulb)
You want the red lamps to be multifunction (1157 bulb)
Yellow housing # 02.282.000 LH - RH  - Yellow lens #02.282.011
Red housing # 02.279.000 LH - RH  - Red lens #02.279.011

fastbusa:
thank you for that info...I have a couple sets of lights but it just seems my bezels look kinda large compared to the oem lights i have...they have 6 inch hole instead of 5..

01Lambiero:
I think that earlier Diablos had the larger taillights with 2 screws on the lens.  The 6.0 has the smaller ones with 3 screws on the lens.  Depending on the model, the taillights utilize different light assemblies and locations.  Hope this helps.  You can buy oem style small taillights from Susquehanna at www.rallylights.com/detail.aspx?ID=2333 for about $40 ea.  I don't know where you can purchase the larger lights.
Jim

Navigation

[0] Message Index

[#] Next page