Build Diaries > Aventador

Aventador Build

(1/7) > >>

Neils88:
You're making great progress! You seem to be going twice as fast since you decided to sell!  ::tongue

LP700-4:
Lots of progress this weekend. I was able to get the front suspension installed.

Project is still for sale

https://youtu.be/rtkxrsh1EUg

LP700-4:
Here is a new video - worked on the rear framing and adding in the x-brace above the engine

https://youtu.be/FRbPhMJE7TU

Jets303:
If I had to guess, 60 degrees or so. 30 from 90.

The Auto is dialed in but its sensitive. If you come around a corner and press the peddle to heavy, the transmission will down shift and the motor revs like hell and it gets sideways! You kinda have to feather in the power or it downshifts and redlines lol

If I had to do it again, I would have gone 6 speed! If you go 6 speed and dont like it, Ill trade you for this setup!

LP700-4:
I will have to pick up some 1/4 plate for when I get to the hinge mounts, thanks.

Do you know what your coil over angles are at from 90 degrees? I can use that to calculate that actual spring rates. I will probably go lighter in the rear and a little higher in the fronts

Are you still having issues with the auto? I thought you resolved that already as a shifter issue??? My plan was to use the auto...

Navigation

[0] Message Index

[#] Next page