LamboClone - The Premier Site for Lamborghini Replica Builders

Build Diaries => Aventador => Topic started by: italianknightrider on May 10, 2012, 07:16:08 AM

Title: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on May 10, 2012, 07:16:08 AM
would there be any interest in this Orange Roadster SuperBass 700-4U version
(http://i18.photobucket.com/albums/b138/italianknightrider/Aventador_RoadsterKit.jpg) my favorite color right herrre !~!13" stretch 106.30 in  trying to be 100% accurate is over-rated !!
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg.html)

Exotic Sports car 20" rims
Body style 2-door Roadster
Layout Mid-engine, four-wheel drive
Engine 5.3 L V8 
Transmission 4-speed Auto
Wheelbase 2,700 mm (106.30 in)
Length 4,780 mm (188.19 in)
Width 2,030 mm (79.92 in) (w/mirrors: 2,265 mm (89.17 in)) [1]
Height 1,136 mm (45.00 in)
Curb weight 1,655 kg (3,050 lb)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on May 10, 2012, 12:07:04 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/Aventadorheadlight.jpg)

(http://i18.photobucket.com/albums/b138/italianknightrider/aventadorreplicaheadlightpods.jpg)

(http://i18.photobucket.com/albums/b138/italianknightrider/AVMirror1.jpg)




Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: dratts on May 10, 2012, 12:22:52 PM
Is 2950 lbs. Your anticipated weight?  My Fiero framed version with Held suspension, 13" brakes and 20" tires, and LS4 drivetrain weighs in at 3400 lbs.  Are you going to have a price on a turnkey?
Title: Re: Orange Roadster LP700-4U version ....
Post by: italianknightrider on May 14, 2012, 07:37:35 PM
Roadster rear plug ...full OEM size ,doors  ...i would never start with a front engine car ,leave that to the front engine car builders

(http://i18.photobucket.com/albums/b138/italianknightrider/new.gif)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasssmoothfrontTXT.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/AventadorRoadsterrearclip.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Aventador_RoadsterKit.jpg)

(http://i18.photobucket.com/albums/b138/italianknightrider/AVENTADORSpiderdooranmirrorOUTLINETXT.jpg)

(http://i18.photobucket.com/albums/b138/italianknightrider/Aventadorsub-frame13inchstretch.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/AVENTADORCHASSISFRAME.jpg)


(http://i18.photobucket.com/albums/b138/italianknightrider/53LITERENGINE303hpallaluminum2.jpg) BELLHOUSING IS 4T65E HD(http://i18.photobucket.com/albums/b138/italianknightrider/IMAGE019.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/AventadorReplicawithLS4matedtothistransaxle.jpg)


ENGINE:  Aluminum LS4  5.3Li V8 FWD 550lb 
HORSEPOWER: 303 / with simple mod 325HP
TORQUE: 323 lb feet
Max RPM: 6100
0-60 mph: 6.0 seconds
60-0 mph: 138 feet
1/4 Mile: 14.5 seconds @ 101 mph ..in Fiero 13
EPA: 18 mpg city/28 mpg highway
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on July 09, 2012, 08:09:40 PM

(http://i18.photobucket.com/albums/b138/italianknightrider/Aventadorreplicastyleseattxt.jpg)

 A NEW chapter will soon be starting in the replica field

 ::headbang ::rocker ::bounce ::salute ::scratch ::K
(http://i18.photobucket.com/albums/b138/italianknightrider/happy_face_new.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Hotradioactive.gif)
(http://i18.photobucket.com/albums/b138/italianknightrider/gargamel.gif)
(http://i18.photobucket.com/albums/b138/italianknightrider/gates56.gif)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on July 15, 2012, 12:28:45 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasssmoothfrontTXT.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSSuperBass-1.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/engnecovercarbonfiberpiece.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/jcover3txt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRFIEROSUB-FRAMESURROUND13INCHSTRETCH.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/happy_face_new.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/G28roofanbodybasicsupport.jpg)
                                                                    FULL SIZE
updates for last month ,front cap, going to one bad butt Roadster just like the orange car ,SKILLED LABOR credits go to my sculptor ,he is hands down the freaking BEST !!

FIERO Chassis already set up ,doors also worked out ...3 more different kits to finish... working as fast as we can


if anyone need their Fiero chassis set up for this build we can get it done in Houston Tx. off of FM-1960

Stretch
Engine swap install
Rough Body Mount
Payment plans are easy an simple we can work out any form of arrangments
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on July 21, 2012, 12:34:07 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassseat3TXT1.jpg)
seat shells &  lights

http://www.fiero.nl/forum/Forum1/HTML/078049-6.html (http://www.fiero.nl/forum/Forum1/HTML/078049-6.html)  kit on this page
http://www.fiero.nl/forum/Forum1/HTML/078049-7.html (http://www.fiero.nl/forum/Forum1/HTML/078049-7.html)
 
making a modified set for the SuperBass kit 800.00 shipped
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: dratts on July 21, 2012, 05:18:44 PM
Not only is it ok to put down someone elses work if there is a problem with it, I think that there is a moral imperative to do so and protect other builders.  Please don't anyone here think that it's not ok.  Just make sure that your put down if you have one is factual.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Tallon on July 22, 2012, 09:10:58 AM
It's ok to put down someone's work?
That's not the same thing as constructive criticism...
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: dratts on July 22, 2012, 10:27:37 AM
"If" there is something wrong.  Not just putting someones work down when there's nothing wrong.  If I bought defective product etc. I would want other builders to be warned and I would want other builders to warn me too.  We do it all the time and it's one of the benefits of our forums.  I try to be constructive with my posts.  I prefer not to go negative.  I just don't agree with the entire part of IKRs post at the bottom.  It bothers me every time I see it because it seems to say we don't have the right to criticize and I think that criticism is very important in our hobby.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Onewickedsvt on July 22, 2012, 10:33:43 AM
Your not following what he is saying. He is saying don't knock what is being done by saying "it looks like crap", or "mans got no skills, etc".

He's not saying not to be critical, just don't be a doosh about it.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on July 22, 2012, 11:42:02 AM
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRsSUPERBASSEV-7.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg.html)

whats funny about all this crap is if it were a hero member " that you would expect to see producing plugs an parts of this caliber the masses would cheer him on,so he would finish an be successful regardless of past or present conditions ! ... but its me ,so i,m catching crap with every post , with respect to all that,s following an or looking sometime.... all the money spent on these projects are totally funded by me ,my sculptor put in extra work , time an sometime he make parts at no cost to make the build " PERFECT " / better ,  ...without each other we would not be this far alone on the build.   
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: lambo_sam on July 22, 2012, 12:22:08 PM
Wow Nice!!!, IKR keep up the good works!!!, can't wait to see that rollin'!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: dratts on July 22, 2012, 03:07:42 PM
I didn't criticize your work.  Just the statement that you put at the bottom saying to keep my mouth shut if I can't say something good.  You know what I thought of your parts from before and I don't want to bring it up again.  I liked the door cards I got from you and most of the upper part of your dash.
Quote from: italianknightrider on July 22, 2012, 11:42:02 AM
whats funny about all this crap is if it were a hero member " that you would expect to see producing plugs an parts of this caliber the masses would cheer him on,so he would finish an be successful regardless of past or present conditions ! ... but its me ,so i,m catching crap with every post , with respect to all that,s following an or looking sometime.... all the money spent on these projects are totally funded by me ,my sculptor put in extra work , time an sometime he make parts at no cost to make the build " PERFECT " / better ,  ...without each other we would not be this far alone on the build.   
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on July 22, 2012, 06:31:56 PM
Nothing good to say about the subject so you say something after all these months about my words of expressions
 
it was made for me.... the Reventon seat shell does exist ,no one has used them here ,that s all !!  ::headbang ::thumbup ::scratch


(http://i18.photobucket.com/albums/b138/italianknightrider/SuperbassheadlightsfinishedTXT.jpg) super smooth and ready to mold
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Tallon on July 22, 2012, 08:40:26 PM
I mean an accurate one.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: tonypaul on July 27, 2012, 11:28:20 AM
Im sure I missed it somewhere, but what transaxle is that?
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on August 12, 2012, 03:10:21 PM
Transmission is 1999 Chrysler 300M
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on August 12, 2012, 03:11:02 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassOrangeRoadster.jpg) Clean ,smooth,time to make molds an pull Roadster parts on the front cap
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperbassfrontcapbyIKRtxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassbumpersidebyIKRtxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Aventador_RoadsterKit.jpg) my favorite color right herrre !~!13" stretch 106.30 in
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperbassBatWingQuarterstxt.jpg) MOLD TIME separate Bat Wings
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearbumperandiffusortxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperbassBatWingmoldsmadetxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRearClipbyIKRtxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/engnecovercarbonfiberpiece.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassenginecover1.jpg) PLUG engine cover set ,.. soon
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterairboxTXT.jpg) FULL rear Roadster Quarters made ....BLK pieces are fiberglass ...deck lid is left open because we are installing the Jota like piece so we have 2 options
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassBatWingtxt.jpg)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: tonypaul on August 12, 2012, 07:03:00 PM
Looking GOOD!!!!! ::headbang I like it when people do what they say and not just talk about!!!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on August 21, 2012, 05:44:49 AM
Lovely build. Good work brother.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on August 30, 2012, 03:09:30 PM
thanks the headlights an Front bonnet is done ,working the Front Bumper & Wings ,

(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassFrontbonnet.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassHoodVents.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfrontcapbyIKR2.jpg) Quality work  ::headbang ::thumbup ::K
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on September 14, 2012, 09:09:19 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfrontcapsideviewtxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassEnginecoverdecklidrearwingbatwingsanventsunderneath-1.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassenginecoverdecklid.jpg)mold
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterrearclipanparts.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfiberglassrearwing.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearwingmold.jpg) rear wing mold

the other kits will be cheaper , but be prepared to make your own inner structures over engine cover for glass an under front trunk to tie the fenders together ...you get what you pay for !!!

my sculptor put in extra work , sometime he make parts at no extra cost to make the build better / " PERFECT " ,  ...working together has made this project very very successful already !!! 
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: lambo_sam on September 14, 2012, 09:42:01 PM
WOW Just Incredible!!!!  ::salute ::thumbup
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: LP640 on September 15, 2012, 01:12:32 AM
absolutely spectacular!  ::thumbup
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Tallon on September 15, 2012, 08:53:43 AM
Nice work
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Peggyontherunireland on September 15, 2012, 03:27:58 PM
Great work IKR and here is a few picture from yesterday i got a spin in this baby  ::rocker

(http://i1168.photobucket.com/albums/r489/seandoyleireland/7985285093_a7103b909a_b.jpg)
(http://i1168.photobucket.com/albums/r489/seandoyleireland/0024.jpg)
(http://i1168.photobucket.com/albums/r489/seandoyleireland/0018.jpg)




Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: lambo_sam on September 15, 2012, 07:09:22 PM
I see that 6.0 in the background of the first pic  ::bounce
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Peggyontherunireland on September 16, 2012, 10:44:28 AM
That was a replica from Switzerland nice motor but the mirrors looked wrong on it se where he has his mirrors
Quote from: lambo_sam on September 15, 2012, 07:09:22 PM
I see that 6.0 in the background of the first pic  ::bounce
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Onewickedsvt on September 16, 2012, 02:51:55 PM
Who cares!at least it's a real car!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: AdrianBurton on September 18, 2012, 07:25:22 PM
Strosek has the mirrors up there

Quote from: Peggyontherunireland on September 16, 2012, 10:44:28 AM
That was a replica from Switzerland nice motor but the mirrors looked wrong on it se where he has his mirrors
Quote from: lambo_sam on September 15, 2012, 07:09:22 PM
I see that 6.0 in the background of the first pic  ::bounce
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: lambo_sam on September 19, 2012, 03:30:38 AM
Hmmmm... Ok I see it's a roadster but with a 6.0 front clip and early year murcie wheels, which easily will fit diablos, and relocated side view mirrors, P.o.t.r. are you sure it's a replica? Looks to me its a real roadster with some customizing ::scratch And his windshield wiper works!...lol

Cannonball- Dublin, Ireland 2012 supercars (http://www.youtube.com/watch?v=E0PhsG-gGmk#ws)

Keep up the good works IKRRRRRRRRRRRRRRRRR!

Quote from: AdrianBurton on September 18, 2012, 07:25:22 PM
Strosek has the mirrors up there

Quote from: Peggyontherunireland on September 16, 2012, 10:44:28 AM
That was a replica from Switzerland nice motor but the mirrors looked wrong on it se where he has his mirrors
Quote from: lambo_sam on September 15, 2012, 07:09:22 PM
I see that 6.0 in the background of the first pic  ::bounce



Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on September 23, 2012, 12:56:38 PM
moving  alone  Lambo_Sam                      2 ENGINE SWAPS NEXT on the 13" stretched chassis,s


I agree with this for the most part ,NAERC Replica chassis has 3-4 more inches in the foot well area it longer an the fire wall is straight up not angled like the fiero so like i said 3-4" where your feet fit but the dash is closer to you an cause problems for tall people getting in an out ,i am 6'-2" 202lbs i have no problems getting in an out of the fiero , i do have to let the column all the way up before i get out of my reg fiero so for anyone over 6' tall change the column to a GM cavalier tilt ( what NAERC USED or now the new option from MM THE Sebring column ) it make the interior look better anyway. On a personal note i like the fiero because the fuse panel & wiring, brake line pluming,master cyl. ,porpotion vavles , the a/c system , radiators ,gas tank an lines

GM did not want to build a car that would or could compete with their FLAG SHIP "CORVETTE" an this was a HOT TOPIC at GM so a 90hp 4cyl or a 140HP V6 , THE SUSP. came from cheap econo fuel savers from the 70,s an yes stretching a fiero even in stock form will help cool the front side of the engine ,get heat off the firewall , plus increasing the wheelbase is better for cornering or i guess i should say turnning in curves ,setting up a good pair of swaybars would make this thing feel like its on rails (front & rear )

All good points from IKR! People FORGET about ALL the additional work required for a tube chassis.




(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasschassis2_zps44bd432a.jpg) 106.3"WB
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasschassis1_zps920f6718.jpg) 106.3"WB
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearwing2_zpsf94f4a64.jpg) SuperBass rear wing
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearenginecover_zpsefbbaf77.jpg) rear engine cover out of the mold
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 01, 2012, 12:12:55 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfiberglassfrontendTXT3_zpsf4c5844e.jpg) FIBERGLASS
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassFrontbonnet.jpg)


We have the most accurate , detailed an functional body available , the others may have been first, but the Quality leaves a lot to desire !! I present the SuperBass Roadster Front Cap .... Just a few more pieces to go , excited as a kid in a candy store .... where the lemon heads !!!!!!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 11, 2012, 07:33:21 PM
check out the sound of this LS4 engine EXHAUST IN A HONDA S2000


Cartuning LS4 5.3 (http://www.youtube.com/watch?v=UNL6d9XQ5U4#ws)

5.3 liter Chevrolet V8 powered Honda S2000 (http://www.youtube.com/watch?v=Vy2da9otZBA#ws)

Aventador Shooting FLAMES! LOUD Sound in Tunnel! - 1080p HD (http://www.youtube.com/watch?v=E9SdMHDVFGE#ws)
weight ,just imagine it in a Fiero V6 Chassis add 176HP more to a Fiero Chassis
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Hellboy on October 12, 2012, 12:57:25 AM
I have a curiosity question... When building a car why do so many builders choose to go with a Fiero frame? It seems to me that the replica chassis out there are far more superior and newer... Is it because of cost? Or other issues also?
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Murci-Me on October 12, 2012, 01:18:37 AM
Most early Diablo and Murcielago kits were designed to fit on the Fiero chassis. I dont think there's anything wrong with using a donor, whether its a Fiero, MR2, Boxster or whatever. Using a donor is usually cheaper, faster, and easier to register. It all depends what you're looking for.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Tallon on October 12, 2012, 07:27:46 AM
psst... cheaper would mean buying more expensive parts for the tube chassis and not the donor. All depends.
and not everyone can find a really nice fiero for a few hundred dollars.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Tusabes on October 12, 2012, 01:21:07 PM
Quote from: Hellboy on October 12, 2012, 12:57:25 AM
I have a curiosity question... When building a car why do so many builders choose to go with a Fiero frame? It seems to me that the replica chassis out there are far more superior and newer... Is it because of cost? Or other issues also?

The fiero allowed people to put a kit body on a running driving chassis for the cost if the fiero ($1-2000) and a stretch $(1-2000).  Buying a custom chassis , drivetrain etc costs much more.

Of course this cost savings only applies if you use the stock fiero engine , suspension interior etc.  Once you start changing those , the cost savings diminishes
For the people changing the interior, engine etc it makes less sense to use a fiero
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 17, 2012, 05:53:48 PM
ls4 stand alone start swap (http://www.youtube.com/watch?v=GcfL34htkBc#) sweet
 
revival of the LS4 (http://www.youtube.com/watch?v=j2VJR8me-jw#) sweet exhaust note

find a spare engine cradle , send it to US
 
Stage 1 we will put the engine an trans mounts on it an purchase axles
Stage 2 get your wiring harness done we use an support Fiero King
Stage 3 get engine an trans low mileage take-out , gas pedal , ecu , tcm
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 22, 2012, 02:29:11 PM
we transferred the templates  from graft paper to 90 pound poster board so the lexan company can scan them an the borders are built into the scan... the vent , quarter an rear glass ,just a update we will sit the front cap on the Fiero Wed or Thursday

(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassQUARTERGLASS.jpg) quarter
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassVENTGLASS.jpg) vent
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassDOORGLASS.jpg) door
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassBACKGLASS.jpg) back


(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage002.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage002.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage003.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage003.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage001.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage001.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage004.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage004.jpg.html)

Box of SuperBass Replica glass / lexan with bull nose edges =(round & smooth edges) ,sides, quarters, vents, & back .....Reventon head light covers ....full size they are bigger than the Eddie kit

(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassDashanpodancenterconsole.jpg) dash will be several pieces
(http://i18.photobucket.com/albums/b138/italianknightrider/LP7004UDASHPODFACE3.jpg) 1 PC GAUGE FACE
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 29, 2012, 11:21:29 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/hexagonacrylicrodstxt.jpg)(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassheadlightplugstxt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/003-3.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/AventadorYdaylight.png) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/AventadorYdaylight.png.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassheadlightcoverplugs2.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassheadlightcoverplugs.jpg) plug for clear lens covers
(http://i18.photobucket.com/albums/b138/italianknightrider/Superbassheadlightson.jpg)

Curved Headlight cover plugs for the SuperBass Roadster ,tail light plugs finished tomorrow
 8) ::thumbup ::headbang ::rocker ::tongue ;)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 31, 2012, 03:25:13 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearlensplugs.jpg) TAIL LIGHT LENS COVER PLUGS


The same serious strength you expect from Gorilla Glue, in a Dries White, 2X Faster formula. Whether indoors or out, Gorilla Glue easily bonds foam, wood, metal, ceramic, stone and much more!

100% WATERPROOF – does not break down when exposed to outdoor elements
VERSATILE – ideal for most household fixes, indoors or out
TEMPERATURE RESISTANT – once dry, Gorilla Glue is unaffected by extreme heat or cold
SANDABLE, PAINTABLE, STAINABLE – the invisible glue line makes for easy finishing

Clamp Time: 30-60 minutes
Open Time: 5-10 minutes
Full Cure: 24 hours
Dry Color: White

Storage Tips: Gorilla Glue is a moisture-cured adhesive. It is important to replace the cap tightly, and store in a cool, dry place. You should expect a year shelf life.

Available in Precision Pen and 2oz
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: jason5499 on October 31, 2012, 05:00:28 PM
When do you estimate your first whole set of fiberglass will be pulled?  Keep up the good work brother.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on October 31, 2012, 08:57:46 PM
we have front an rear fiberglass panels Now just missing the door mirrors , doors an side skirts. We are making parts from our own budget ,we have 1 invester who is waiting for his body,an this guy is very paitient ,he said this is by far the most accurate body to date , even after real panels become available this will still be the most user friendly package for sometime to come !!


we are trying to get it right an have the most complete package on this side of the pond.

Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on November 12, 2012, 12:13:13 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadstertop.jpg) Roadster

IKR Kustoms: SuperBass Roadster (http://www.youtube.com/watch?v=Cm7daPhHkkc#ws)


(http://i18.photobucket.com/albums/b138/italianknightrider/LP7004UDASHPODFACE3.jpg) 1 PC GAUGE FACE
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSUPERBASSSTEERINGWHEELAIRBAGCOVER.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasschassis2_zps44bd432a.jpg) 106.3"WB
(http://i18.photobucket.com/albums/b138/italianknightrider/superbassfierochassis.jpg)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on November 22, 2012, 05:13:23 PM
Did some trial fitting today to see how the SuperBass Front Cap look on the stretch Fiero

(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassFRONTCAPonFiero-1.jpg)

misspell word sorry

(http://i18.photobucket.com/albums/b138/italianknightrider/Superbass053TXT.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Superbass055TXT.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Superbass058TXT.jpg)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on November 30, 2012, 02:15:39 PM
SuperBass gauge face art work has been completed ,they will make the first run in white ,not black back ground ,an i also have 2 other gauge face art work was completed as well ,just hang on guys they will run them next week , the SuperBass dash an pod should be done in 2 weeks ,i will post pictures of it

SuperBass Gauge Face
(http://i18.photobucket.com/albums/b138/italianknightrider/LP7004UDASHPODFACE3.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassGaugefacetxt.jpg) simple an Fiero friendly for S10 gauges

you saw this first at LamboClone.com 11-30-2012
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on December 11, 2012, 09:44:31 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/new007.jpg)

here are the headlight & taillight lens covers ,this is a 4 coat process that encapsulate the foam lens cover plugs an then they are use to make the lens covers directly over the pattern

START WITH THE BEST FORGET THE REST !!  ::salute ::K ::thumbup ::usa ::headbang  Saving money up front mean hunting parts forever to finish up, go with the built-in trim components : IKR SuperBass

One piece rear clip with lower diffusor an built in tail lights

 
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 07, 2013, 02:20:01 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassMansory-Blue-Lamborghini-Aventador-Wallpaper.jpg) wild color almost too much stuff added to the car ,i like the front fender vents an carbon fiber under the side skirts an roof
(http://i18.photobucket.com/albums/b138/italianknightrider/SUPERBASSBigLP670REARWING.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Superbasswhitemansory.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SUPERBASSMansoryCRIPSONRED.jpg)


Coupe available too !!  8) ::tongue ::bounce ::)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 08, 2013, 12:44:55 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/new.gif)
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSUPERBASSROADSTERBESTONTHEMARKET.jpg) One piece rear clip with lower diffusor an built in tail lights
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassBatwingstxt2.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBasssideskirt-Lowerrockersill.jpg)side skirts
Doors (http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS029.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SBMOLDS029.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterrearbumper.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassPetrolDoor2.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterrearbumper2.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasspertoldoor.jpg) 3 doors
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/superbasslargebodykittxt-1.jpg)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on January 21, 2013, 07:51:47 AM
Quote from: italianknightrider on November 30, 2012, 02:15:39 PM
SuperBass gauge face art work has been completed ,they will make the first run in white ,not black back ground ,an i also have 2 other gauge face art work was completed as well ,just hang on guys they will run them next week , the SuperBass dash an pod should be done in 2 weeks ,i will post pictures of it

SuperBass Gauge Face
([url]http://i18.photobucket.com/albums/b138/italianknightrider/LP7004UDASHPODFACE3.jpg[/url])
([url]http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassGaugefacetxt.jpg[/url]) simple an Fiero friendly for S10 gauges

you saw this first at LamboClone.com 11-30-2012


Those clocks are really nice. Do you get those up to 320km/hr though? Are those clocks mph?

How much is a cluster like that?

Cheers
Jackal
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 21, 2013, 08:12:26 AM
i could have them make one ,i was not going to make any on this model because i still have 25 for the Murcie ,320kph, one went to New Zealand ,the Murcie kits are just about over to many sellers ,  ::thumbup  ... build the newest KIT out ,if the chassis is the same or close ,why put a old body over your new chassis. Real question ,would you get more money for a Murcie or a SuperBass on your chassis today !!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on January 21, 2013, 08:26:47 AM
Quote from: italianknightrider on January 21, 2013, 08:12:26 AM
i could have them make one ,i was not going to make any on this model because i still have 25 for the Murcie , one went to New Zealand

How much would that cost and what are the dia size of the dials? 

Thank you.

Jackal
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 21, 2013, 08:51:50 AM
check your PM box , i have them set up for the color posted an white face Oem gauge pod will work ,the sheet size is set up for anolog dials ,not the electronic ,i will measure it when i go to the shop
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on January 21, 2013, 09:12:24 AM
Quote from: italianknightrider on January 21, 2013, 08:51:50 AM
check your PM box , i have them set up for the color posted an white face Oem gauge pod will work ,the sheet size is set up for anolog dials ,not the electronic ,i will measure it when i go to the shop

I will be building my own dash etc, centre console, the works. So the unit you have in the pic looks perfect. Just wanted size so that I know what I am looking at. I read your pm, thanks for that. I am interested but have no knowledge of this kind of thing. I learn as I go on. My engine is an Audi Rs 4 4.2 litre with wiring harness and ecu's. Not sure how the hookup works. The setup really looks stunning
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 21, 2013, 09:26:49 AM
the real car has a digital display so it show one at a time ,i put all of them on one gauge face to show all of them at the same time.

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/Aventador42.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBREARFENDERS.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBasspertoldoor.jpg) 3 doors
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBREARFENDERLINES.jpg)



(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfiberglassfrontendTXT3_zpsf4c5844e.jpg) FIBERGLASS
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassFrontbonnet.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/IKRKUSTOMSSuperBassrearclipmolds.jpg)(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearwing2_zpsf94f4a64.jpg) SuperBass rear wing
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterrearbumper.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassrearenginecover_zpsefbbaf77.jpg) rear engine cover out of the mold (http://i18.photobucket.com/albums/b138/italianknightrider/new.gif)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SUPERBASSMINUTURETXT2.jpg)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 26, 2013, 11:11:27 AM
Just posted pictures of the SuperBass Roadster rear clip molds on the last page of this thread  ::beers ::thumbup ::rocker ::headbang ::bounce
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on January 30, 2013, 12:33:20 AM
Quote from: italianknightrider on January 21, 2013, 08:51:50 AM
check your PM box , i have them set up for the color posted an white face Oem gauge pod will work ,the sheet size is set up for anolog dials ,not the electronic ,i will measure it when i go to the shop

Hi IKR,
Just wanted to clear up a thing or two. You say it is analogue and not electronic. Sorry for my ignorance, I have as you know the RS4 engine with 01E gearbox. Complete RS4 wiring harness. This would mean I have need for electronic setup right? Or could I still use the analogue way. Sorry I have no knowledge of this.

I realize the tacho would most probably run from the coils right?

Regards
jackal
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 30, 2013, 12:44:33 AM
PM sent , they are electronic but have needle arms on front to move over the gauge face ,and not digital movement
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Murci-Me on January 30, 2013, 12:57:19 AM
Quote from: Jackal on January 30, 2013, 12:33:20 AM
Quote from: italianknightrider on January 21, 2013, 08:51:50 AM
check your PM box , i have them set up for the color posted an white face Oem gauge pod will work ,the sheet size is set up for anolog dials ,not the electronic ,i will measure it when i go to the shop


Hi IKR,
Just wanted to clear up a thing or two. You say it is analogue and not electronic. Sorry for my ignorance, I have as you know the RS4 engine with 01E gearbox. Complete RS4 wiring harness. This would mean I have need for electronic setup right? Or could I still use the analogue way. Sorry I have no knowledge of this.

I realize the tacho would most probably run from the coils right?

Regards
jackal


The Aventador has all analog (needle) guages with a digital (display) information center. If the set-up that you have now has needle guages, they can be reconfigured to fit behind any guage face art. You would then have to figure out what you want to do in the information screen area, and install a digital speedometer in the tachometer face.
Exclusive! Aventador Interior Features! Gauges, Engine Start Button and Open Doors! (http://www.youtube.com/watch?v=jImqc8cc5nM#ws)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 30, 2013, 01:02:40 AM
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/rs4_dashgauges.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassGaugefacetxt.jpg)


find these gauges they came in a RS4 V8 engine set-up
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Murci-Me on January 30, 2013, 01:06:10 AM
Those guages will work as long as they are compatible. They should be if they are from the same model car your engine/computer came from. You will still need to find a digital speedometer though, Summit Racing sells them.
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on January 30, 2013, 01:14:59 AM
get the matching dash plug ,to wire up the gauges , i sent a PM 

http://ezwiring.com/wiring_harness.html (http://ezwiring.com/wiring_harness.html)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Jackal on January 30, 2013, 04:38:23 AM
Quote from: italianknightrider on January 30, 2013, 01:02:40 AM
([url]http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/rs4_dashgauges.jpg[/url])
([url]http://i18.photobucket.com/albums/b138/italianknightrider/IKRSuperBassGaugefacetxt.jpg[/url])

Is that just a random pic from the internet you posted? I would want those if available and not toooooo pricy.


find these gauges they came in a RS4 V8 engine set-up
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on February 03, 2013, 03:20:09 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassRoadsterrearclip2txt.jpg) Drivers side
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassRoadsterRearcliptxt.jpg) Passenger side Fiberglass/ GRP parts pulled out of the molds 

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassRoadsterrearclip3txt.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassRoadsterrearbumper.jpg)



(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassHomeStretchBestontheMarket.jpg) Final stages last month ....Will be the best on the Market with everything functioning !!!!!
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBREARFENDERS.jpg) big enough for the radiator either side   Lambo Aventador Doors (http://www.youtube.com/watch?v=UKndHq0kTNk#ws)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Murci-Me on February 03, 2013, 04:42:07 PM
How close are you to having the entire body and being ready to sell them?
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: No Bull on February 03, 2013, 05:08:31 PM
It's coming along nicely and you can begin to see an end in sight.  Any ETA on when you'll have the first bodies to sell?

Chris
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on February 11, 2013, 12:08:31 PM
Quote from: No Bull on February 03, 2013, 05:08:31 PM
It's coming along nicely and you can begin to see an end in sight.  Any ETA on when you'll have the first bodies to sell?

Chris

Thanks Chris , i added a final stage photo on the last page , all window openings are true to scale, i was going to wait an show parts but i think it need to be shown that we have the BEST ,most accurate body at this stage of the game ......Game Changer ,has arrived ordered 70 gallons of resin an 2 boxes of brushed 10 gallon tooling gel coat & 3 rolls of mat an 1 roll of cloth   
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: Onewickedsvt on February 11, 2013, 12:51:01 PM
Just curious and wondering, is the front triangle window going to be carved out eventually?
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on February 11, 2013, 01:01:01 PM
Quote from: Onewickedsvt on February 11, 2013, 12:51:01 PM
Just curious and wondering, is the front triangle window going to be carved out eventually?


No, because the vent glass is curved at the bottom ,i decided it would follow the contour better with it closed in the mold  ,other kits makers just put a flat piece here ,which is wrong , attention to detail. This is a master plug so i cleaned out the window area,s for a more realistic effect of how the parts will look. THANK you FOR POINTING this OUT or at least getting others an yourself to see small details.

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/AVENTWRONGSHAPE.jpg)


(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBROADSERROOFVersionchassisTXT.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/IKR670STYLEPARTS012.jpg) SPLASH MOLD
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/001.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/001.jpg.html) Part in the mold
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS013.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/Aventador_RoadsterKit.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS029.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SBMOLDS029.jpg.html) side skirts made and doors covered in fiberglass ,doing body work , door jam & sill plate will be covered in fiberglass in 2 weeks
 
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/IKR670STYLEPARTS009.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/IKR670STYLEPARTS009.jpg.html) tail lights and dash made ,need to be covered in fiberglass
(http://i18.photobucket.com/albums/b138/italianknightrider/AVMirror1.jpg) Mirrors done
Roof support for both Versions

Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on May 16, 2013, 07:44:50 PM
Update real soon ,we had a major set back .... sculptor decides to start his own business after we paid for 90% of the plug ,oversea,s, when it made it to the final stages of completion , with it being so far away we had no course of action to rectify the situation . We had to buy a good 3d file to make the door jam/sill plates and scoops , we had to spend money on these parts twice . Be careful Oversea,s they know you are not going to travel the distance to collect what is yours. One of my co-workers died from cancer 2 weeks ago ,we been on overtime for 5 weeks as soon as i can i will clear up all my deals , i need some shop time ,i was off 1 day so i started on the IKR ReAction body ...sold one and have a possible customer in Argentina looking ..... All the black fiberglass SuperBass Roadster parts on this thread are here in the USA ...Houston , we are body working all the parts and doing final clean up for the new Molds , in 6-8 weeks we will have new photo,s of the SuperBass , 4fifty8 , Modified Reventon ReAction .....  BACK ON TRACK !!!

the F70-Concept is also being cut in a few weeks .....well 5 weeks it will be started
(http://i18.photobucket.com/albums/b138/italianknightrider/IKR%20F70%20Concept/F70Conceptconvertible.jpg) (http://s18.photobucket.com/user/italianknightrider/media/IKR%20F70%20Concept/F70Conceptconvertible.jpg.html)
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: italianknightrider on May 19, 2013, 10:07:32 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/SuperBassfiberglassfrontendTXT3_zpsf4c5844e.jpg) FIBERGLASS

[URL=http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/006.jpg.html](http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/006.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/sbdoorbottomtxt.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/sbdoorbottomtxt.jpg)[/url]here is the final and last pieces ,both on the table
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassRoadsterRearcliptxt.jpg)
a little more body work on the Roadster body , door jam / sills , scoop  ,and it time to open that bottle of champagne !!! ALL these parts in the USA ,right now!! WHOLE KIT.....


(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage002.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage002.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage003.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage003.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage001.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage001.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage004.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage004.jpg.html)

Box of SuperBass Replica glass / lexan with bull nose edges =(round & smooth edges) ,sides, quarters, vents, & back .....Reventon head light covers ....full size they are bigger than the Eddie kit

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/013-2.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/013-2.jpg.html)
Molds for head light and tail light lens covers
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider001/SBDASHBOARDTOPSECTIONOEMSIZEtxt.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider001/SBDASHBOARDTOPSECTIONOEMSIZEtxt.jpg.html) IKR DASH

gearing up to sell parts to all the guys who buy the cheap kits , then find out they are missing half the components to build it & trim it out ,it all cost the same in the end 

Our Kit .....well it,s the mutt,s nuts .......Big & Bad !!
Title: Re: Orange Roadster LP700-4U version ....Turnkey
Post by: autopro on May 19, 2013, 11:05:20 PM
Quote from: italianknightrider on May 16, 2013, 07:44:50 PM
F70-Concept is also being cut in a few weeks .....well 5 weeks it will be started
([url]http://i18.photobucket.com/albums/b138/italianknightrider/IKR%20F70%20Concept/F70Conceptconvertible.jpg[/url]) ([url]http://s18.photobucket.com/user/italianknightrider/media/IKR%20F70%20Concept/F70Conceptconvertible.jpg.html[/url])


Man, can't wait to see this one.  Please keep me posted :drool
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on October 01, 2013, 04:56:27 PM
We will cut 2 new cars in Jan. 2014

BAT WINGS AND SCOOPS ARE FUNCTIONAL WE ARE WAITING ON THE WINDSHIELDS TO COME IN ,HEAD LIGHT & TAIL LIGHT LENS MADE 

(http://i18.photobucket.com/albums/b138/italianknightrider/Aventador_RoadsterKit.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBmolds004.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SBmolds004.jpg.html)

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/022.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/022.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS029.jpg)[/URL] side skirts
 (http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS013.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/016-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/016-1.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/022-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/022-1.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBINTERIORDOORHANDLE.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SBINTERIORDOORHANDLE.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/010-3.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/010-3.jpg.html) head light and tail light covers
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/008.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/008.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/014.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/014.jpg.html) parts out
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/013.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/013.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/LP7004UENGINECOVERMOLDS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/LP7004UENGINECOVERMOLDS.jpg.html) ROADSTER ENGINE COVER
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/001.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/001.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBBODYKIT.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBBODYKIT.jpg.html) same as this body we have the coupe body too .... finishing up last few interior pieces ,we had to buy doors and door jams and roof from somewhere else but we now have them !!
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on October 07, 2013, 04:43:18 PM
Robslp640 New front Aventador wide body extended front with diffuse.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: dwafford on January 28, 2014, 02:41:34 PM
I'll be interested to know the price for a body kit when you're finished.  How close would it come to fitting on the NAERC Diablo tubular chassis?
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on January 28, 2014, 07:02:19 PM
we will show it in 3 weeks or less , your chassis will be about 2 1/2" to short to fit the 106.3 wheelbase

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBIKRDOORS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBIKRDOORS.jpg.html)

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/001-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/001-1.jpg.html)
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: autopro on January 29, 2014, 01:28:25 PM
Quote from: dwafford on January 28, 2014, 02:41:34 PM
I'll be interested to know the price for a body kit when you're finished.  How close would it come to fitting on the NAERC Diablo tubular chassis?

You can always adjust the suspension mounting location to match the wheelbase.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Digibeam on January 29, 2014, 02:58:49 PM
but is it just the wheel base that has shifted? or has the whole car been lengthened?

for example, moving the rear A arms back on the frame 2" or so isnt difficult and there is room for sure, but the upper frame area has mount areas or physical attributes that should also be relocated?  will the rear section of the frame also be 2" too short?  or should the rear section of the NAERC frame be lengthened at a specific area (possibly behind the firewall) to account for the extension?
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: autopro on January 29, 2014, 03:29:31 PM
You could do it either way by making the rear section two inches longer or re-locating the suspension mounting locations.  If you only move the suspension I can see you having to add additional support for the suspension mounts.

Another thing you would need to modify is the suspension arm lengths to match your wheel offset and new wheel track.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Digibeam on January 29, 2014, 03:47:34 PM
I am curious as to where the extra length comes into play on the new body, this will dictate what has to be done on a frame to make it suitable for the new body to mount properly.

shifting rear suspension is more than just weld the tabs down a few inches, the frame was designed also for the upper mounting of the springs/shocks and, the triangulation of the frame is optimised for these mounting locations...shifting the lower areas without also addressing the upper areas will lead to a stressed structure or suspension misalignment.
maybe i am reading into it a bit deep, but i feel building a tube chassis, there is not much room for error, it is designed to self support and once you take something and alter its intended use...its anyones guess.
not to create stress or downplay the new body, i am just as interested in this as anyone, but again, this is just my opinion.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robert on January 30, 2014, 02:04:59 AM
Has the size of the passenger compartment increased to match the longer wheel base? Moving your suspension back a few inches is very acceptable. If some one is concerned about structual intregrity, add an Asgard force field, or thicker tube, and maybe a few gussets.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: 01Lambiero on January 30, 2014, 11:14:45 AM
You could do a 2-D overlay of your chassis/Murcie on a same scale Aventador body.  Compare the steering wheel location to the centerline of the front wheels and you should come up with where the additional inches were added.  Maybe it was split, adding a little to the front axle and a little to the rear etc.  If I were puting a V-12 in, I would add the 2" at the firewall. 

(Asgard force field??  I was thinking of room for twin flux capacitors)

Jim 
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: 76mx on January 30, 2014, 12:59:54 PM
What is an Asgard force field? Is that kind of like sky hooks?
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Digibeam on January 30, 2014, 02:12:17 PM
maybe while we are at it add a few layers of unobtainium and a pail of spangle?
then we could sit down and think about the actual force that is exerted on a tube frame and mount points in a mid/rear engine vehicle taking a curve at 50mph?  its all fun and games till someone makes a mistake...  just saying...
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 09:32:13 AM
Anyone have this piece, or just me
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: BigPines on March 01, 2014, 11:55:11 AM
Is that OEM spec Rob?
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 12:04:34 PM
Yes oem copy, I have it, I didn't Design it, but I have it now
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: BigPines on March 01, 2014, 02:04:08 PM
Wow, you are getting a nice Aventador collection together. Good job!
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 02:17:11 PM
Thank you
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 04:01:11 PM
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBSUPERBASSREARDIFFUSSER.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBSUPERBASSREARDIFFUSSER.jpg.html)

not sure why all their photo,s off the Eddie kit keep showing up on our thread and not the Roblp640 interior thread 
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 04:12:56 PM
Proving a point, that I have the only own copies along with original oem parts. Including oem grills, and copies, instead of working against each other, better to work with,  saves everybody money
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 04:23:37 PM
so that,s it , we are not working against anyone ,we have our own products ,threads and photo,s ,we work with several people whom been around us for years   
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 04:25:37 PM
Never ever did I put ur work down. How come I have never seen a completed car u, or ur guys have done.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: LP640 on March 01, 2014, 04:27:11 PM
IKR, any updates on that concept body kit? thanks
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 04:31:55 PM
because we sell body kits mostly , in this market we would rather sell a great body kit that sell a car that most cannot afford when finished to a turnkey from our package. just a rear bumper on the Concept

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider003/SBbodyINNERDOOR.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider003/SBbodyINNERDOOR.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider003/sbdashboardtxt-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider003/sbdashboardtxt-1.jpg.html)our interior (http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider003/SBIKRDashpod7.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider003/SBIKRDashpod7.jpg.html) Gauge cluster/pod
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Robslp640 on March 01, 2014, 05:00:37 PM
Ok makes since. If I have any parts u need let me know. My copies of the oem grills Will be ready in a couple weeks.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Onewickedsvt on March 01, 2014, 06:22:12 PM
I cant wait to finally see a completed kit from IKR.

Too many projects, all sporadic and all over the place.

I will send over a 12 pack of whatever beer you prefer once a single project is complete with a full body. ::beers
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 06:25:02 PM
One of our most trusted and prestigious members will post a build Diary thread in a few months , IKR SUPERBASS ROADSTER BUILD BY ________
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Digibeam on March 01, 2014, 06:33:17 PM
is there a "Single" picture that shows all the parts of the car so far in one spot?
not photoshop version... an actual picture, all the parts on the floor...
i would like to see everything as far as it has come, because i wouldnt mind investing in this if it is complete, but i only see random images that have been cut away or modified.
thats what i would like to see... :)
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 06:47:47 PM
i remember asking you that same question about yours ,Believe me we have it !! All exterior is done ,we may modify a couple of pieces to fit better around the fiero chassis ,still have a couple of interior pieces that are not and were never done by anyone to completion = a whole center console. Posting all our ideas make other strive for better end results ,we KNOW what we have ,plus options that would make some of the members here go crazy. we stopped posting because there is no reason to compare Orange,s to Apples 
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: Digibeam on March 01, 2014, 07:12:06 PM
I dont have a "kit" for sale...  and the areas you have asked to see pictures of are not for show and tell for the simple reason they are personally designed and fabricated, but if i am thinking of investing in a new body which is for sale such as the one you seem to be offering, i would like to see everything that i am investing in,and not have to piece together several pages of images from several forums etc. there is nothing secret about the car body, unless you are making it unlike the OEM version, and at that point i would not be interested.
there seems to be a "race" to be the "first to finish" between yourself and Rob, so, lets see who has the most parts and they will probably win the race...
i am not trying to insult by asking, i believe it is a fair request, if i am wrong then by all means accept my apologies and i will invest in someone else. no worries.
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on March 01, 2014, 07:25:30 PM
being first is not our goal , being as accurate as we can within reason ,if that were the case we would put it out quick ,fast and in a hurry to collect money ,this is not our goal. it will be seen soon enough and i apologies to those who are really interested,our goal is to be true to the original idea.
we will post pictures of the first 2 ExoSkeletons  for the SuperBass 

WE HAVE A 12,000.00 KIT AND A 22,900.00 KIT .....DIFFERENT COMPONENTS ..... lights , interior components , exterior components , hinges , trim items and the 4 wheels/rim package

 We can get a tube chassis made for you for 15,000.00     a 106" WB roller
Title: Re: Orange SuperBass Roadster LP700-4U
Post by: italianknightrider on June 09, 2014, 11:17:23 PM
The fronts will require a 4" width extension, and the rear will require a 3" width extension (adapters per side, obviously). The front suspension will also require a drop of about 1 1/2"

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/Ventadorgasdoor.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/Ventadorgasdoor.jpg.html) OEM looking gas door

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBIKRSteeringwheelcover.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBIKRSteeringwheelcover.jpg.html)


This is Just the tip of the Iceberg  !!!!

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBHEADLIGHTCOVERS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBHEADLIGHTCOVERS.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBheadlightdeptinside-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBheadlightdeptinside-1.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBSVWINGSTANDSLEGS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBSVWINGSTANDSLEGS.jpg.html)

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/022.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/022.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS029.jpg)[/URL] side skirts
 (http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SBMOLDS013.jpg)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/016-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/016-1.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/022-1.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/022-1.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBDOORJAMSET.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBDOORJAMSET.jpg.html) Roadster door jam set 4 pieces...a left & right side,the windscreen surround with header & tie bar across rear section is built into the Jams ...this sit over the fiero cab section with roof removed ,the exoskeloton frame come with our package
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/IKRKUSTOMSDOORJAMS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/IKRKUSTOMSDOORJAMS.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/LP7004UENGINECOVERMOLDS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/LP7004UENGINECOVERMOLDS.jpg.html) ROADSTER ENGINE COVER
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBROADSTERWINDSCREENHEADER.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBROADSTERWINDSCREENHEADER.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBTRIMITEMS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBTRIMITEMS.jpg.html) TAKING OUR TIME TO GET IT RIGHT .... Our package is ahead of the other crap out their ,for sale, remember saving money ,will cost you time chasing down missing parts or having to make them from scratch !! we are offering 2 kits a economy version and the more expensive version with all the bells and whistles
 
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBIKRKUSTOMSDASHPOD.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBIKRKUSTOMSDASHPOD.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBIKRKUSTOMREARDIFFUSOR.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBIKRKUSTOMREARDIFFUSOR.jpg.html)

All these parts are ours 

more pic inside this post in a few weeks ,final stages of completion   ... all emails *NOW* come to our cell phone,s for faster response time !!!
Don,t listen to the BSh*tters .... if you are interested in the Best in the USA check with us after you have gone every where else !!

IF YOU SHOPPING for a CHEAP PRICE ONLY,WE ARE NOT THE PLACE FOR YOU !! when you can,t assemble those Cheaper kits,the reason is,it was missing most of the small items that you didn,t know about when you purchased that cheap kit !! If your ONLY GOAL is to have a "look alike" not  Replica , and or very skilled at making missing fiberglass pieces ,plus frame structure to support your home made parts,get the cheapest kit you can find.  Poor planning on your part will increase the build time ,cost more money than a package in the end ,if somebody will sell you the missing components & pieces.

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/SuperBassglasspackage002.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/SuperBassglasspackage002.jpg.html) SuperBass :: Curved Quarter glass,Vent glass,Back glass,Door glass ,Rev OEM size head light covers 17" L
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBCLEARCOVERS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBCLEARCOVERS.jpg.html) curved head light covers and tail light covers


curved glass for doors ... 4 pieces set -vent glass & quarter glass ,with black borders , shipped $175.00  (does not include main door glass)
curved head light & tail light cover clear or smoked   $220 shipped                    ready now !!! ...... items are to OEM spec ,may not fit some kits- buyers are responsible for the purchase of items purchased from the SuperBass or Nccrayballa kit .....items will fit both of these kits

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBWINDSHIELDFRAME2.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBWINDSHIELDFRAME2.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBREARDIFFUSORMOLD.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBREARDIFFUSORMOLD.jpg.html)
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBDOORMOLDPASSSIDE.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBDOORMOLDPASSSIDE.jpg.html) Pass side
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBDOORMOLD.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBDOORMOLD.jpg.html) Dr side
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBINTERIORPARTS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBINTERIORPARTS.jpg.html)

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBIKRSTARTERBUTTON.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBIKRSTARTERBUTTON.jpg.html)


*****WHO will have the first OEM looking SuperBass Style Replica on the Road...Not those Eddie Crap kits*****

WHO WANT A FRONT ENGINE LAMBO ,REGARDLESS OF HORSE POWER !!  MID-ENGINE ONLY HERE .....  REPLICA BODY KIT MUST LOOK REALISTIC !!

Fabricating all the grill shells , seats , lights ,light covers, interior & gauge face , glass/lexan package ,Hinges .... a package that Look worth a darn & is of Quality is costly and time consuming to make,if you buy a kit that contain fiberglass only ,how will you get the rest of the pieces to finish it .....exactly you make each and everyone yourself ,when you should have purchased a package. there are money Grab Kits & Kit Packages ....the price will vary alot ,its up to the consumer to buy what he or she like or can afford. 

Don,t be fooled by Plug kits, when you cut OPEN the hood ,engine cover,trunk, doors etc. there is noting behind them , no door jam,trunk jam, engine cover jam ,JUST A big opening ..... build that ,the EDDIE kit came in made $80-100 Thousand dollars ,then left ,WHY because it,s missing most of the real fiberglass parts required to build a drive able car.Wait until Feb or March 2015 ....WHEN THE REAL KITS SHOW UP as Packages.

We have the Fake engine cover set ,to match the Body Kit !!
IKR SuperBass Neno Roadster Starts Feb - 2015            SuperBass Roadster Econo Body ........ SuperBass Roadster Regular Body

the skill set requires more work the interior is also more detailed ,both exteriors are 90% accurate from appearance ,the 10% difference is built around donor chassis to body fitment and cost effective components like glass ,light and lens covers, hinges,latches ,grills & vents. time invested in finding suitable components make the replica build able. buying a 6000.00 fiberglass kit with no idea or information ,on how to install/mount the body onto your donor ,or what,s needed to complete it, that Would Not be my first choice.

   (http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20ventador_roadster%203%20sections.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20ventador_roadster%203%20sections.jpg.html) 3 sections for easy assembly,we worked out all the latches,hinges,window set up, windshield ,glass , lights ,lens covers,all trim.

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/IKR%20REPLICA%20SEAT%20SHELLS%20amp%20CENTER%20CONSOLE.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/IKR%20REPLICA%20SEAT%20SHELLS%20amp%20CENTER%20CONSOLE.jpg.html) anyone need Ventador seat shells, console, or door cards contact me : italianknightrider@yahoo.com

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightriders%20album%202/IKR670STYLEPARTS008.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightriders%20album%202/IKR670STYLEPARTS008.jpg.html)   tail lights / surround housings

PM or email us if you see some items you need ,we sell parts  : italianknightrider@yahoo.com

*****ExoSkeloton frame will be completed soon ,this will come with the SuperBass Body Kits ,thus reducing build time & alignment issue ,it,s better for you the builder ,to get on the road Quicker and Safe***** We have no competition to compete with


(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20DOORS%20SKINS.jpg.html) new pictures

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20FAKE%20ENGINE%20COVER%20FILE.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20FAKE%20ENGINE%20COVER%20FILE.jpg.html)Complete top section cover
(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider006/SB%20IKR%20CENTER%20PIECE.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider006/SB%20IKR%20CENTER%20PIECE.jpg.html)

Just remember ,You get what you pay for...... you can not get a $550,000.00 car for $4000.00 ,not happening, you have to shop quality or price ,both come with advantages & disadvantages ,if you have several month of time to devote to bodywork ,filler / primmer. You can shop price, if you want to build it and drive it within 6 months to a year ,shop Quality.
IKR

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20IKR%20NENO%20SEAT.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20IKR%20NENO%20SEAT.jpg.html)



(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SB%20Aventador%20body%20kit.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SB%20Aventador%20body%20kit.jpg.html) SuperBass


(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/SBVENENOREARBUMPER33.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/SBVENENOREARBUMPER33.jpg.html) Coming Soon SuperBass Neno   By: IKR KUSTOMS

(http://i18.photobucket.com/albums/b138/italianknightrider/italianknightrider002/IKR%20OEM%20Size%20Door%20Jam%20Molds.jpg) (http://s18.photobucket.com/user/italianknightrider/media/italianknightrider002/IKR%20OEM%20Size%20Door%20Jam%20Molds.jpg.html) IKR OEM Size door jams ***best on the market***


WE HAVE MOVED TO FACEBOOK !!!!