LamboClone - The Premier Site for Lamborghini Replica Builders

How To - Tips => Doors => Topic started by: MrMoo on April 06, 2025, 03:18:50 PM

Title: Ideas for outer door latch
Post by: MrMoo on April 06, 2025, 03:18:50 PM

Hi@all,

I have a somewhat unconventional door latch setup in my car. It consists of just a metal rod connecting the inner push button directly to the exterior of the vehicle.  :sosad You can see the details in the attached pictures.

I’m considering using aftermarket locks from an old Audi 100 for an upgrade. These locks would ideally be installed on the topside of the "tunnel" (see picture). However, I’m open to better suggestions regarding lock types, manufacturers, or alternative solutions.  ::scratch

My main concern is figuring out how to connect everything together effectively. If anyone has experience with a similar setup or can share their solution, I would greatly appreciate your advice.

Thank you in advance!

Title: Re: Ideas for outer door latch
Post by: eddie on April 07, 2025, 06:39:22 PM

well, the original door lock button  was square and the Peugeot 505 trunk button is very similar, 25 years ago I used it on my Coutach 25th 

Title: Re: Ideas for outer door latch
Post by: ★ Murcie-Me ★ on April 09, 2025, 06:08:42 PM

Wow, whoever did that latch install did it completely backwards. The latch should have been on the door and the strike on the jamb. I guess they had a 50/50 chance of getting it right lol.