« previous next »
Pages: [1]

Author Topic: 915 shifter  (Read 2598 times)

Murci-Me

  • Guest
  • Trade Count: (0)
Re: 915 shifter
« Reply #6 on: January 27, 2013, 08:13:39 PM »
the 915 is available in both 4 and 5 speed. You should figure out which one you have before buying a shifter for it.
Logged

norcaldiablo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 44
  • Liked: 0
  • Member Rating Points: +0/-0
Re: 915 shifter
« Reply #5 on: January 27, 2013, 08:07:55 PM »
I read somewhere that someone was using a Fiero shifter for a Porsche tranny. They didn't go into detail however, but said it was working well.?????

Did Fiero have a 5 speed?
Logged

norcaldiablo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 44
  • Liked: 0
  • Member Rating Points: +0/-0
Re: 915 shifter
« Reply #4 on: January 27, 2013, 07:47:05 PM »
I have nothing but the trans, no shifter or cables.

I believe it is a 5 speed but not sure.
Logged

jamack

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 96
  • Liked: 0
  • Member Rating Points: +0/-2
Re: 915 shifter
« Reply #3 on: January 27, 2013, 07:02:52 PM »
Just sent you contact info for CMS...
Logged

Murci-Me

  • Guest
  • Trade Count: (0)
Re: 915 shifter
« Reply #2 on: January 27, 2013, 06:07:15 PM »
Do you have the actual shifter, but need help with the linkage between the shifter and trans?
Logged

norcaldiablo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 44
  • Liked: 0
  • Member Rating Points: +0/-0
915 shifter
« Reply #1 on: January 27, 2013, 05:55:53 PM »
I have an IFG Diablo now. It gas an LS1 with a porsche 915. There is no shifter, and just a "rod" sticking out of the back of the trans. I have no experience with Porsche's.

I am wondering how to shift it. I have heard to stay away from cable shifters, yet see Kennedy and such make kits for this, offering a simple solution. I have seen the sketch for making a mechanical one but haven't crawled under te car to see if I could make one.

Any suggestions?

Phil
Logged
Pages: [1]
« previous next »