« previous next »
Pages: [1] 2

Author Topic: Door Hinge Adjustment - How the Factory Does It  (Read 7057 times)

LA12241

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 12
  • Liked: 17
  • Member Rating Points: +2/-0
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #18 on: February 11, 2014, 10:00:53 PM »
pictured from underside, once door is aligned, hinge stays on door permanently and removed from frame, hinge is drilled through and 2 dowels allow it t be fitted again in position once door is painted
Logged

SchulzeA

  • Global Moderator
  • Trade Count: (+15)
  • Hero Member
  • *****
  • Posts: 536
  • Liked: 217
  • Member Rating Points: +33/-1
  • Lambo Mafia
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #17 on: December 09, 2013, 06:41:12 PM »
Quote from: BigPines on December 09, 2013, 09:08:08 AM
Is that an OEM part or did you make those Alan?
I made it by hand with a guess for dimensions until String could share them. Came would pretty close to! Thanks for sharing the blue print String.
Logged

Purple LP670 SV

  • Lambo Mafia
  • Global Moderator
  • Trade Count: (+11)
  • Hero Member
  • *****
  • Posts: 738
  • Liked: 650
  • Member Rating Points: +23/-0
  • Big Gulps, huh? All right! Well, see ya later.
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #16 on: December 09, 2013, 03:52:52 PM »
How thick are these plates, lip and all? It looks like 5mm material might be more appropriate for the main pieces and 3mm for the tab.  Then just not worry about making that lip that runs all the way around. They look like they may be a little difficult to machine without the material fraying. What if they were lasered out and somehow bonded together? Just a thought!
Logged
I met a man with a dollar, we exchanged dollars and we still had a dollar. I met a man with an idea, we exchanged ideas and now we both have two ideas!!!

No Bull

  • Administrator
  • Trade Count: (+25)
  • Hero Member
  • *****
  • Posts: 1108
  • Liked: 299
  • Member Rating Points: +21/-0
  • Replication is the sincerest form of flattery
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #15 on: December 09, 2013, 03:32:34 PM »
Thanks String!

Looks like a part that is begging to be CNC'd from carbon fiber plate.   ::toothy

http://www.ebay.com/itm/400-250-3-0mm-Carbon-Fiber-plate-panel-sheet-3K-plain-weave-gloss-finish-/221315776627?pt=Radio_Control_Parts_Accessories&hash=item338772c073

Any interest in these if a pair in carbon fiber can be bought for around $160 a pair shipped in the USA?  I wouldn't be making them but I know of a coupe guys on here that have the skills and access to the tools to make them.  ::headbang

Chris
Logged

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 246
  • Liked: 135
  • Member Rating Points: +19/-0
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #14 on: December 09, 2013, 03:00:17 PM »
Plate dimensions , as requested ( in US ) & model file attached. :)
« Last Edit: March 03, 2015, 03:34:15 PM by String »
Logged
Oooh , Red leather.

No Bull

  • Administrator
  • Trade Count: (+25)
  • Hero Member
  • *****
  • Posts: 1108
  • Liked: 299
  • Member Rating Points: +21/-0
  • Replication is the sincerest form of flattery
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #13 on: December 09, 2013, 02:39:58 PM »
Quote from: 01Lambiero on December 09, 2013, 02:34:41 PM
Just a reminder to all that you should rough fit your door (as accurately as possible) with the bolts in the center of the slot on the hinge.  (All 8 bolts centered in their respective slots) Then after you have welded your forward hinge support, you can do the minor adjustments through the access hole.  Maybe JDinner can input some advice here on this but my thinking is to fit the door skin to the rear quarter as far as the flush fitment goes and then go to the front fitment to the front fender. 
Jim

That's a great point Jim and the difference for us is that we need to figure out the location of the hinge supports and everything else unlike the factory that has everything already engineered, set and figured out.

Chris
Logged

01Lambiero

  • Global Moderator
  • Trade Count: (+1)
  • Hero Member
  • *****
  • Posts: 1167
  • Liked: 404
  • Member Rating Points: +24/-3
  • "Using the skills that God gave me"
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #12 on: December 09, 2013, 02:34:41 PM »
Just a reminder to all that you should rough fit your door (as accurately as possible) with the bolts in the center of the slot on the hinge.  (All 8 bolts centered in their respective slots) Then after you have welded your forward hinge support, you can do the minor adjustments through the access hole.  Maybe JDinner can input some advice here on this but my thinking is to fit the door skin to the rear quarter as far as the flush fitment goes and then go to the front fitment to the front fender. 
Jim
Logged
20 yr. GM Niase certified Auto Mechanic (Tune-Up, Brakes, & Heavy Repair)
24 yr. GM Automated/Robotic Welding Systems
Retired

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #11 on: December 09, 2013, 09:08:08 AM »
Is that an OEM part or did you make those Alan?
Logged
If I don't have time to do it right, when will I have time to do it over?

SchulzeA

  • Global Moderator
  • Trade Count: (+15)
  • Hero Member
  • *****
  • Posts: 536
  • Liked: 217
  • Member Rating Points: +33/-1
  • Lambo Mafia
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #10 on: December 09, 2013, 02:38:17 AM »
You can make these pretty easy fellas. ::thumbup
Logged

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #9 on: December 08, 2013, 08:41:34 PM »
OK, I have some things to consider on this one. Maybe someone else will get around to making these before I do. LamboJayso? :)
Logged
If I don't have time to do it right, when will I have time to do it over?

No Bull

  • Administrator
  • Trade Count: (+25)
  • Hero Member
  • *****
  • Posts: 1108
  • Liked: 299
  • Member Rating Points: +21/-0
  • Replication is the sincerest form of flattery
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #8 on: December 08, 2013, 04:46:19 PM »
Quote from: BigPines on December 08, 2013, 04:05:47 PM
So the price is $160.66. Is that for a pair or one? Nice pic BTW!

That's per side or $321.21 a pair.   ::toothy

Might be a part worth trying to make.  I would start with a block of hardwood that is cut slightly smaller than the opening (start with a  cardboard template and transfer it).  Cut out a  piece of aluminum or thin gauge sheet metal so it overlaps the block by about 1/8" on three sides and 3/4" on the forth side.  Drill two holes through the metal and use a couple of wood screws to hold the metal to the wood.  Gently tap the edges of the metal so it forms around the edges of the wood and creates a vertical lip on the three shorter sides and create a step flange on the forth lip.  Pull everything apart, weld the holes shut and either tack weld a bolt onto the back of the plate for the washer and nut.  A thin coat of bondo, primer and paint and you are done.  :)

Chris
« Last Edit: December 08, 2013, 04:49:28 PM by No Bull »
Logged

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #7 on: December 08, 2013, 04:05:47 PM »
So the price is $160.66. Is that for a pair or one? Nice pic BTW!
Logged
If I don't have time to do it right, when will I have time to do it over?

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 246
  • Liked: 135
  • Member Rating Points: +19/-0
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #6 on: December 08, 2013, 12:59:51 PM »
A Christmas style picture of these parts . ::tongue
Logged
Oooh , Red leather.

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 246
  • Liked: 135
  • Member Rating Points: +19/-0
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #5 on: December 08, 2013, 10:23:59 AM »
Part number is ...410837267
Prepare to be disappointed in that the eurospares price is wrong - shame.

http://www.bullstuff.com/lamborghini-parts-manual/murcielago-2010-murcielago-lp-640-coupe-usa/825.01.00
Item 23. , this is the correct price.Mine are S/H .
 ;)
Logged
Oooh , Red leather.

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Door Hinge Adjustment - How the Factory Does It
« Reply #4 on: December 08, 2013, 09:44:28 AM »
I looked on the diagrams at eurospares but couldn't find these. Do you have part numbers?
Logged
If I don't have time to do it right, when will I have time to do it over?
Pages: [1] 2
« previous next »