Author Topic: Off-the-Shelf Parts for the Murcielago  (Read 25808 times)

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 445
  • Liked: 257
  • Member Rating Points: +12/-0
  • Show me, don't Tell me...
Re: Off-the-Shelf Parts for the Murcielago
« Reply #67 on: December 20, 2013, 11:51:10 PM »
haha  i think thats a little error,  lambostuff sells that for around $120   but even still for what it is its a bit much.....

armyman

  • Trade Count: (+2)
  • Full Member
  • ***
  • Posts: 146
  • Liked: 6
  • Member Rating Points: +5/-0
Re: Off-the-Shelf Parts for the Murcielago
« Reply #66 on: December 20, 2013, 11:38:26 PM »
Man check this page out an click on part number 34, You can also look up any other parts you need.
http://www.eurospares.co.uk/partTable.asp?M=2&Mo=734&A=2&B=44794&S=

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #65 on: December 20, 2013, 08:04:28 PM »
I just used a little solvent and elbow grease to clean them up. It is hard to tell from the pictures but the strikers are brushed aluminum and the latches are brushed steel. I don't know if they are all like that or if I got some special ones.
If I don't have time to do it right, when will I have time to do it over?

Digibeam

  • Trade Count: (+2)
  • Sr. Member
  • ****
  • Posts: 445
  • Liked: 257
  • Member Rating Points: +12/-0
  • Show me, don't Tell me...
Re: Off-the-Shelf Parts for the Murcielago
« Reply #64 on: December 20, 2013, 06:47:56 PM »
wow those door latches look incredible!!  i would really like to have a set that looks like those

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #63 on: December 20, 2013, 10:42:56 AM »
Seat belt upper covers/caps from two different BMWs described in the first thread. A decent day at the junkyard. :santa
If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #62 on: December 20, 2013, 10:40:49 AM »
Power window switch from a Cadillac Catera. I should have taken a picture of the car I got it from but I didn't think of it.
If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #61 on: December 20, 2013, 10:37:38 AM »
A trip to the junkyard turned up a nice pair of 1974 Mercedes door hinges. They cleaned up real nice. These are the hinges described in the first post. I have also attached a pic of the car they came from.

If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #60 on: November 20, 2013, 02:46:55 PM »
Wow, I feel dumb. Yep, I just pulled on them and they came right out. I just assumed they were the locking type of connectors. You know what happens when you assume...

I hope these pics help. The only marking on them is the number 2 as seem below. Hopefully, you will be able to find the correct connector. If you do, please post back here so we can add it to the list.

Mike
If I don't have time to do it right, when will I have time to do it over?

String

  • Trade Count: (+6)
  • Full Member
  • ***
  • Posts: 246
  • Liked: 135
  • Member Rating Points: +19/-0
Re: Off-the-Shelf Parts for the Murcielago
« Reply #59 on: November 20, 2013, 12:03:41 PM »
Looks like the 'hinge and latch' that go across the connector are to hold the terminals in place, here is a picture of my socket ,and the only place for the plug to latch onto is down the sides adjacent to the hinge . If you can peer down and see if the yellow sticks out a bit then it would just need a small implement inserted to release each side.
I only asked as I was going by ebay pics which showed the wires unplugged. ;D
Oooh , Red leather.

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #58 on: November 20, 2013, 10:07:38 AM »
String has asked for close-up pics of the solenoid connectors so he can try to source the parts. We all know how Neil likes his connectors to be spot on. :)

I couldn't figure out how to release the connectors and I didn't want to break them so this is the best I could do for now. It looks like there is a hinge on one side and a buckle on the other but I can't get my smallest flat head driver in there to unlatch it. Want to describe to a dummy how to do this? ;)
If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #57 on: November 19, 2013, 09:06:03 PM »
I purchased some Audi A6 projectors on eBay and have confirmed they are the exact same part as on the Murcielago (see Mr. Butler's pics above). The electric lid in these is interesting. It works just fine with a little 12v power. The brown wire is negative and the white, positive.
If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #56 on: November 13, 2013, 06:36:49 PM »
Good news! D2S connectors can easily be added to those cheap Hella ballasts I picked up making them exactly the same as the OEM ballasts at a fraction of the price.

Again, the ballasts: http://www.ebay.com/itm/161090619782?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

plus the D2S connectors: http://www.ebay.com/itm/290960103493?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Gives you a pair of OEM spec ballasts for $36.88 including shipping! You really can't beat that.

WARNING: Working with these ballasts involves high voltage. Please exercise caution.

Hookup is dead simple. There is a large red wire and a smaller wire which is sometimes yellow. The large red wire goes to the center contact and the smaller yellow wire goes to the outside/edge contact in the D2S connector. Then all you need is the projector lenses for a complete headlight set-up.
« Last Edit: November 13, 2013, 06:51:16 PM by BigPines »
If I don't have time to do it right, when will I have time to do it over?

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: Off-the-Shelf Parts for the Murcielago
« Reply #55 on: October 16, 2013, 09:23:57 PM »
Thanks! Those are great! :)
If I don't have time to do it right, when will I have time to do it over?

usmc_butler

  • Lambo Mafia
  • Administrator
  • Trade Count: (+11)
  • Hero Member
  • *****
  • Posts: 1677
  • Liked: 418
  • Member Rating Points: +33/-0
  • Mafia Productions
    • Lambo Mafia
Re: Off-the-Shelf Parts for the Murcielago
« Reply #54 on: October 16, 2013, 09:10:24 PM »
Test picture from my phone..

usmc_butler

  • Lambo Mafia
  • Administrator
  • Trade Count: (+11)
  • Hero Member
  • *****
  • Posts: 1677
  • Liked: 418
  • Member Rating Points: +33/-0
  • Mafia Productions
    • Lambo Mafia
Re: Off-the-Shelf Parts for the Murcielago
« Reply #53 on: October 16, 2013, 08:41:43 PM »
Pines I totally forgot, I'll go outside right now and take pictures, I'm on my phone or I would upload them tonight. Thanks for the reminder, sorry for the wait... ::duh


And I don't have any other OEM lights that go into the bucket..


Dustin