Guys, use BMW full size sedan CV axles. They have the same spline pattern as the Corvette and S10 hubs and a flange style mount on the other end. The bolt pattern in that flange is different from the commonly used transaxles, but a simple adapter is cheap and much easier than cutting up axles. The BMW axles are available in numerous lengths at any auto parts store for under $100 and they are a healthy 1-1/8" thick. Also, the adapter can be made any thickness to fine tune the required length. If you are using a Hall Effect speedo sender, cut the sender grooves into the adapter while it is being machined and save several hundred dollars on parts later.
