Any European or Japaneese option for the suspensions of the Aventador???

[italianknightrider]

not sure what they use on this chassis but it,s set up for a V8

http://www.ebay.com/itm/AFCO-3260BG-Big-Gun-Rear-Coilover-Shock-Canister-Series-6-Inch-Stroke-/262075808155?hash=item3d04ef799b:g:c~MAAOSwFnFWDtvO&vxp=mtr

come in 4" ,5,6 & 7 inch stroke ..... these have the canister on them

[George75]

http://www.ebay.co.uk/itm/Lamborghini-Gallardo-LP560-Replica-Kit-Car-/191723773777?hash=item2ca3a09f51:g:YxgAAOSwgQ9V5gj8

contact : these people ,tell them you need their tubular chassis for the body kit in the ebay ad ,tell them you need to modify the wheel base ,to make it longer ,by adding 5" inside the cab floor ,this will make the wheelbase correct which would be 105.8" by their frame spec,s ,the windscreen frame and a few other supports will have to altered for the newer body by " YOU "

ROLLING CHASSIS ,READY for a 4.2 audi v8 engine and trans

These suspensions, what are they for example?

[italianknightrider]

http://www.ebay.co.uk/itm/Lamborghini-Gallardo-LP560-Replica-Kit-Car-/191723773777?hash=item2ca3a09f51:g:YxgAAOSwgQ9V5gj8

contact : these people ,tell them you need their tubular chassis for the body kit in the ebay ad ,tell them you need to modify the wheel base ,to make it longer ,by adding 5" inside the cab floor ,this will make the wheelbase correct which would be 105.8" by their frame spec,s ,the windscreen frame and a few other supports will have to altered for the newer body by " YOU "

ROLLING CHASSIS ,READY for a 4.2 audi v8 engine and trans

[George75]

Hello,
my name is George and Im located in Europe.
Im planning to start building an Aventador and I would like to know what kind of parts Im gonna need for this project...
For example If I ll have a tube NAERC chassis, is there any European or Japaneese part option, for the front and rear suspensions ends besides the Corvette option?
We all know we can build this car by streaching the MR2, but what about if we have a NAERC tube chassis? Does the suspensions ends of the MR2 match on the NAERC chassis?

Thanks everybody,
waiting your answers :-)