LOL, I think what I was trying to say was "I've forgotten more about building than you'll ever know about it!". Those screws you have shown in the picture are not to mount the stands to the wing fool, those are to secure the inner framework to the wing once its constructed. But you knew that already, right? See, Lamborghini (in all there supreme wisdom) knew that the wing would be under some tremendous stress from the downforce of the wind going over the wing at high speed, causing it to deflect (warp) under that stress. Since the wing is only 3/4" thick at it widest chord section, they had to add a stiffener (frame) on the inside to make the wing more rigid. Are you still following me? The only definite way to attach that frame through the wing and onto the stands are with the 2 screws next to each stand shown in your picture.
Don't feel bad, if you don't learn something new every day then you just aren't living! You should probably feel embarrassed though, your lack of knowledge on the parts you are making to "OEM specs" shows just how ignorant you truly are. Making up stories about how the stands screw and glue to the wing on the OEM part is the icing on the cake lol.
