Author Topic: Murci Tow Hook  (Read 2290 times)

Murci-Me

  • Guest
  • Trade Count: (0)
Re: Murci Tow Hook
« Reply #3 on: February 10, 2013, 12:59:56 AM »
I made my own. Its not as pretty as that one, but worked fine a few years ago when I had to have my car flatbeded (alternator went out). The tow truck driver told me it was my saving grace, if I wouldn't have had it he would have refused to load the vehicle. I was a little worried when I screwed it in, since I had never tested it to see if it would support the load. It worked just fine, and I even made a nice leather bag to put it in lol!
« Last Edit: February 10, 2013, 01:01:44 AM by Murci-Me »

Tallon

  • Trade Count: (+4)
  • Hero Member
  • *****
  • Posts: 1269
  • Liked: 188
  • Member Rating Points: +18/-5
Re: Murci Tow Hook
« Reply #2 on: February 09, 2013, 02:03:12 PM »
I've got one from my audi :D

This reminds me, I bought the towing eye piece from whiteracing months ago and I haven't heard from them since!

No Bull

  • Administrator
  • Trade Count: (+25)
  • Hero Member
  • *****
  • Posts: 1108
  • Liked: 299
  • Member Rating Points: +21/-0
  • Replication is the sincerest form of flattery
Murci Tow Hook
« Reply #1 on: February 09, 2013, 11:18:40 AM »
Hi Guys,

Just wanted to share a quick tip that I'm doing on my car.  Most of you have probably noticed the hole in the drivers side front bumper grille.  This is for a tow hook that is screwed into a holder on the back side.  If you want an OEM tow hook, they aren't that expensive, $36 new ( http://www.lambostuff.com/xq/asp/webcat.yes/prid.20799/action.1/qx/product.htm ) or around $260 for the kit (case, gloves etc http://www.lambostuff.com/product.asp?prid=40821&Mode=add ) and you've got to admit that the kit would be a nice finish detail to your car.  :)

For those who want to save a couple bucks, you can use a the eyelet half from this part and it can be bought at stores like Tractor Supply for around $18   

http://www.tractorsupply.com/national-hardware-reg-3272bc-3-8x6-forged-turnbuckle-hook-eye-3551791?langId=-1&catalogId=10001&storeZip=45804&zoneMarketInfo=2-4&reqUrl=%2Fnational-hardware-reg-3272bc-3-8x6-forged-turnbuckle-hook-eye-3551791&storeId=10551&storeCity=LIMA&lbzipcode=45804&physicalStoreId=123&ddkey=http:LocationBasedPricingCmd

All that is needed is a reinforced bracket tied into the car frame and you can weld a nut or tap a thick piece of steel to accept the tow rod. 

Think of the practicality of this, and it's just a matter of time that your car will break down, run out of gas and / or need to be towed on a flat bed or possibly out of a ditch.  Having this simple addition can save you a ton of money and work later on.

Chris
« Last Edit: February 09, 2013, 11:41:14 AM by No Bull »