Plans for wide track suspension

[Wookie77]

“My widetrack add 3" per side up front and 3.5" per side in the rear. Much better than using spacers or extreme offsets.�

Neils88, That seems to be the same size offset as the spacers I have, and need to eliminate with new suspension. I am confident I can fabricate new arms for only a few hundred dollars at most. I just need to find some drawings, or design my own.

[Neils88]

I didn't know that there was a wider set than 2".

01

I have an Arraut Motorsports wide track setup on my Aventador build.  (88 Fiero). My widetrack add 3" per side up front and 3.5" per side in the rear. Much better than using spacers or extreme offsets.

[minuteman3282]

Not sure, give me an offer. Everything is brand new only used as a mock up.


Sent from my iPhone using Tapatalk

[Wookie77]

Minuteman, thank you for the response. What would you be asking for the QA1 coil overs? And maybe the front suspension?

[minuteman3282]

I’m pretty sure it’s +2 for the front. I only have the front setup. I let the rear go with the cradle. I do have the QA1 coil over for all four corners and spacers for the rear. I was using Gallardo bolt pattern.


Sent from my iPhone using Tapatalk

[01Lambiero]

Do you have a full (frt. & Rr) set and are they 1" or 2" wider?  I didn't know that there was a wider set than 2".  What wheels are you using?

01

[minuteman3282]

I have a wide track set for sale if your interested, everything you need for a Diablo of Mercy set up.

[Wookie77]

Hey everyone. Does anyone know where to get plans for wide track suspension for a Fiero based Roadster? I guess I could design my own if not. I have four inch spacers right now I think (haven’t measured exactly) but don’t want to blow out bearings and have issues associated with spacers. I have searched Pennocks but didn’t come up with anything. Thank you in advance.