Texas Reventon Build

[Texas]

And that's pretty close to when I made a mold of it.

[Texas]

More filler!!! Getting closer.

[Texas]

Bonded the parts together and started caking filler on. I forget how many layers it took but it was a bunch. I used a gallon of filler to make the plug!!!

[Texas]

More testing. Sorry for picture angles.

[Texas]

And to make it easier to mount in the dash I reverse molded the dash so it would fit just perfect. Then I made just the lower part of a g28 shark mouth. And started test fitting.

[Texas]

Hey guys just want to show my portion of the Reventon gauge setup that Solrac and I were working on. So the thought behind this was to get as close to OEM gauges as possible and I took what was already out there and improved/ re-made it. I opened it up so I could fit 2- 7in screens and did a few things so it would be easier to mount the pod.  This is going to be a lot of step by step pics but I hope someone can learn from it. Enjoy. First is Solrac's old pod- it was really ruff but the top design was enough to build off of. I cut the bottom off of it.

[Texas]

The "revy" is looking good Texas.    Thanks Chris!

Chris

[No Bull]

The "revy" is looking good Texas.   

Chris

[Texas]

Thanks fellas. 76mx I would like to see what ya got, your in my neck of the woods. I work in Dallas.

[notnilc20]

Excellent work!!

[76mx]

This may be a little late but I have a set of Reventon molds pulled from the OEM panels, if I can be of any help.

[MDMurcy2]

Thats a good looking profile!  Doing these mock-ups is great......inspires the dream and fuels the motivation.  Its going to look awesome.   

Mitch

[Texas]

  Thanks B

[Texas]

More...

[usmc_butler]

OH OH its off the rocker and on the ground! Looks KILLER