Murci G28 build "Chaos"

[usmc_butler]

Few more parts and pictures. Also made my framing for the rear engine cover last night the framing will need to be panel bond adhered and glassed over. Several of these parts will be reproduced.


Sorry, my finger got in the way of that one picture

[pslim337]

a butler what u got done to your motor cuz i have the same

nice im have took look in to that 4 mine thanx

Rebuilt, roller rockers, cam, pulley, still need to order injectors and have the PCM programed...

[usmc_butler]

a butler what u got done to your motor cuz i have the same

Rebuilt, roller rockers, cam, pulley, still need to order injectors and have the PCM programed...

[pkovgolf]

RT - besides the 1" square tubing, can you tell me what other sizes you used and where you used them in your frame? Just trying to get a few comparisons before I do my interior support - usmc_butler thanks for your input on this before

RT-Did you do the framing by tacking with the body on and then puling and full welding after, or..?
Thank you for your input on the 1" tubing, etc., earlier!!
Peter

[pslim337]

a butler what u got done to your motor cuz i have the same

[usmc_butler]

Here is a short video testing out the rear engine hatch...

Replica Engine Hatch hinged

[pkovgolf]

Cool find/thinking on the door rubber!

[640]

Lovely parts not many more to go 
major parts anyway

[IwantAMURCIE]

 

[usmc_butler]

I pulled some door rubber from the back doors of 99 Ford explorer just to see how they would fit. They fit quite well and nearly the exact same size as the G28 door opening.

[usmc_butler]

Few parts arrived in the mail today so I set them on the console to see how they fit.... 

[Havemurci]

I think D+R used to use and old s-10 reservoir on the Fiero booster to gain clearance because it has a step down design, does anyone remember this trick?

[satinta]

http://www.forbbodiesonly.com/moparforum/showthread.php?30361-A-body-Hemi-offset-brake-adaptor-and-master-cylinder-rod

as mentioned in the link You could also get an adjustable rod for the brake pedal

[satinta]

Redrill the 4 mounting holes 3/4" lower and elongate the pedal rod hole in the dash wall.

Jim

Theye used to put hemis in early barracudas and darts. The master cylinder Would touch the large valve covers so Mopar came up with an adapter bracket. you probably can't use the Mopar one but it should give you some idea about what a well engineered bracket could look like

[pkovgolf]

Hi RT
Your idea with the tape line is a great one. 
Thanks again for your help !