be aware, the inner doors can be different, some dont have the "elevated" hinge pocket, so some of the hinges have the "extra pad" on the door mount side
Quote from: minihawn on December 07, 2015, 02:27:31 PMthanks guys. I'm going to take the plunge and try building a nice set.. i will keep the updates comingI have a very nice set you can use as a templateCCIE
thanks guys. I'm going to take the plunge and try building a nice set.. i will keep the updates coming
I designed my hinges with the OEM bolt pattern for the Diablo. I haven't seen a side by side comparison of the Murcie/Diablo hinges but I believe that they are close but they have different part numbers so they must have different in specs.
OEM hinge $1199 ea. usd. Of course you will want two.Custom hinge $400/pair. Your option. Why do they cost $400? My time is my time. If you want it for free, look somewhere else. The question I get is "How and where do I mount it?" It's a custom fit by you. It's our hobby.Build your own. How hard can it be? Search around. There are a dozen ways builders have built their own.
Quote from: plans4sale on August 11, 2015, 05:00:04 PMQuote from: 76mx on August 11, 2015, 09:34:04 AMQuote from: plans4sale on August 11, 2015, 04:09:11 AM That's also true, but having a weld machine does not equal to having the time/equipment/skills to create a door hinge up to the standard of an OEM look. It's the same reason most builders will prefer to buy steering columns and pedals, rather than fabricating these from metal rods and metal plates, respectively. Some people even don't bother to make their own trunk hinges, even though they are rather easy to make.And that is true as well, but if they do not have the time/equipment/skills to build a simple door hinge, they have no business attempting to build one of these cars. They have none of the requirements. It's hard to believe that a door hinge with OEM-like look could be done with $20, not to mention the time required. Sometimes, it's worth spending the money to acquire an OEM part (not necessarily limited only to door hinge) over investing time and effort to fabricate one that may not meet the high standards of the builder. Take for example the hood and engine cover hinges that we use on the FLT project. It was decided that OEM hinges from last gen Audi TT are the better option. They are widely available on all continents, reliable, have the necessary size and angle of operation, nice OEM look. Most important is, fabricating these from scratch to look like OEM would require too much time and money, should we choose to do it that way. We could easily use a hinge made out of bunch of drilled and bent laser cut plates, however, that would destroy the overall OEM look and feel we are targeting to. The same goes for A/C vents, switches, seats, manual shifter, latches, and many other parts that will not look and/or perform right if made with the money saving priority in mind. Virtually anything mechanical could be fabricated, but at the end f the day, it's the combination of investment/time/quality/look that matters.your input doesnt mean anything when you believe you could get a 2 million dollar investor with a 3d model, or argue tool hardness to machine styrofoam. you are just dumb, that is why you almost died riding your bike.
Quote from: 76mx on August 11, 2015, 09:34:04 AMQuote from: plans4sale on August 11, 2015, 04:09:11 AM That's also true, but having a weld machine does not equal to having the time/equipment/skills to create a door hinge up to the standard of an OEM look. It's the same reason most builders will prefer to buy steering columns and pedals, rather than fabricating these from metal rods and metal plates, respectively. Some people even don't bother to make their own trunk hinges, even though they are rather easy to make.And that is true as well, but if they do not have the time/equipment/skills to build a simple door hinge, they have no business attempting to build one of these cars. They have none of the requirements. It's hard to believe that a door hinge with OEM-like look could be done with $20, not to mention the time required. Sometimes, it's worth spending the money to acquire an OEM part (not necessarily limited only to door hinge) over investing time and effort to fabricate one that may not meet the high standards of the builder. Take for example the hood and engine cover hinges that we use on the FLT project. It was decided that OEM hinges from last gen Audi TT are the better option. They are widely available on all continents, reliable, have the necessary size and angle of operation, nice OEM look. Most important is, fabricating these from scratch to look like OEM would require too much time and money, should we choose to do it that way. We could easily use a hinge made out of bunch of drilled and bent laser cut plates, however, that would destroy the overall OEM look and feel we are targeting to. The same goes for A/C vents, switches, seats, manual shifter, latches, and many other parts that will not look and/or perform right if made with the money saving priority in mind. Virtually anything mechanical could be fabricated, but at the end f the day, it's the combination of investment/time/quality/look that matters.
Quote from: plans4sale on August 11, 2015, 04:09:11 AM That's also true, but having a weld machine does not equal to having the time/equipment/skills to create a door hinge up to the standard of an OEM look. It's the same reason most builders will prefer to buy steering columns and pedals, rather than fabricating these from metal rods and metal plates, respectively. Some people even don't bother to make their own trunk hinges, even though they are rather easy to make.And that is true as well, but if they do not have the time/equipment/skills to build a simple door hinge, they have no business attempting to build one of these cars. They have none of the requirements.
That's also true, but having a weld machine does not equal to having the time/equipment/skills to create a door hinge up to the standard of an OEM look. It's the same reason most builders will prefer to buy steering columns and pedals, rather than fabricating these from metal rods and metal plates, respectively. Some people even don't bother to make their own trunk hinges, even though they are rather easy to make.