Author Topic: What power window switch are we using for the Murci these days?  (Read 10785 times)

Tallon

  • Trade Count: (+4)
  • Hero Member
  • *****
  • Posts: 1269
  • Liked: 188
  • Member Rating Points: +18/-5
Re: What power window switch are we using for the Murci these days?
« Reply #31 on: October 04, 2013, 03:27:39 PM »
I haven't seen this posted anywhere so I figured it may not be common knowledge.

After hours of research, I believe I have found an exact replacement for the power mirror switch. I believe the switch is made by Airtex. It is supposedly used in some models of Cadillac Catera but I was unable to verify that. The part number is 90432360. I found one on eBay and snagged it: http://www.ebay.com/itm/00-01-98-99-97-cadillac-catera-power-side-view-mirror-switch-90432360-/360676630233?pt=Motors_Car_Truck_Parts_Accessories&hash=item53fa009ed9&vxp=mtr&autorefresh=true

The switch is actually pretty common in Germany for some reason. It was used in a vehicle called the Opel Omega B. If you do a search for that part number on http://www.ebay.de/, you'll find several of them.

I couldn't find any other switches with the amber light (what is that for anyway?) on the U.S. eBay site. However, the switch without the light is fairly common in the U.S. and is used in a few GM vehicles. I have confirmed it is used in some Saturns (including the Vue), some Saabs (sometimes with an extra button) and a very similar switch actually appears to have been in the Delorean (good luck finding that one)!

Here is a new one without the light: http://www.ebay.com/itm/AIRTEX-1S7613-Switch-Mirror-Door-Mirror-Switch-/360754997073?pt=Motors_Car_Truck_Parts_Accessories&hash=item53feac6751&vxp=mtr

I hope this saves someone a lot of time (and money). :)


you could most likely go to a junk yard and they won't charge for the switch, mine with the light was from a cadillac catera certain year I forget what it was though. Good idea to also grab the side markers from the same car.
« Last Edit: October 04, 2013, 03:30:19 PM by Tallon »

RT

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 410
  • Liked: 308
  • Member Rating Points: +28/-0
Re: What power window switch are we using for the Murci these days?
« Reply #30 on: October 04, 2013, 12:59:47 PM »
This is a schematic for the Lamborghini mirror switch:



RT
It isn't enough to want a Lambo, you have to want to BUILD A CAR.

autopro

  • Lambo Mafia
  • Administrator
  • Trade Count: (+28)
  • Hero Member
  • *****
  • Posts: 1425
  • Liked: 1204
  • Member Rating Points: +43/-1
  • Tijuana/San Diego
Re: What power window switch are we using for the Murci these days?
« Reply #29 on: October 04, 2013, 12:02:11 PM »

Are your other buttons OEM? The look like it.

The bezels look great. I somehow missed those for sale. How much? Are they still available?

Yes they are OEM window and lock switches.  I don't know if SchulzeA is still making them, you would need to check with him.
Pedro

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: What power window switch are we using for the Murci these days?
« Reply #28 on: October 04, 2013, 11:53:31 AM »
Sweet. The paint on the one I won is worn so I'll probably try to win another one later but at least I have something. Yours looks great!

Are your other buttons OEM? The look like it.

The bezels look great. I somehow missed those for sale. How much? Are they still available?
If I don't have time to do it right, when will I have time to do it over?

autopro

  • Lambo Mafia
  • Administrator
  • Trade Count: (+28)
  • Hero Member
  • *****
  • Posts: 1425
  • Liked: 1204
  • Member Rating Points: +43/-1
  • Tijuana/San Diego
Re: What power window switch are we using for the Murci these days?
« Reply #27 on: October 04, 2013, 11:50:00 AM »
I have that switch, mine came from an 03 Catera.  You just have to keep checking on EBay since the one with the light is not very common.  I think the light is for mirrors with heaters, but I'm probably wrong  ;D

Here is a picture of my switches along with the bezels that SchulzeA made for me.

Pedro

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: What power window switch are we using for the Murci these days?
« Reply #26 on: October 04, 2013, 11:37:27 AM »
I haven't seen this posted anywhere so I figured it may not be common knowledge.

After hours of research, I believe I have found an exact replacement for the power mirror switch. I believe the switch is made by Airtex. It is supposedly used in some models of Cadillac Catera but I was unable to verify that. The part number is 90432360. I found one on eBay and snagged it: http://www.ebay.com/itm/00-01-98-99-97-cadillac-catera-power-side-view-mirror-switch-90432360-/360676630233?pt=Motors_Car_Truck_Parts_Accessories&hash=item53fa009ed9&vxp=mtr&autorefresh=true

The switch is actually pretty common in Germany for some reason. It was used in a vehicle called the Opel Omega B. If you do a search for that part number on http://www.ebay.de/, you'll find several of them.

I couldn't find any other switches with the amber light (what is that for anyway?) on the U.S. eBay site. However, the switch without the light is fairly common in the U.S. and is used in a few GM vehicles. I have confirmed it is used in some Saturns (including the Vue), some Saabs (sometimes with an extra button) and a very similar switch actually appears to have been in the Delorean (good luck finding that one)!

Here is a new one without the light: http://www.ebay.com/itm/AIRTEX-1S7613-Switch-Mirror-Door-Mirror-Switch-/360754997073?pt=Motors_Car_Truck_Parts_Accessories&hash=item53feac6751&vxp=mtr

I hope this saves someone a lot of time (and money). :)
« Last Edit: October 04, 2013, 11:50:34 AM by BigPines »
If I don't have time to do it right, when will I have time to do it over?

autopro

  • Lambo Mafia
  • Administrator
  • Trade Count: (+28)
  • Hero Member
  • *****
  • Posts: 1425
  • Liked: 1204
  • Member Rating Points: +43/-1
  • Tijuana/San Diego
Re: What power window switch are we using for the Murci these days?
« Reply #25 on: October 04, 2013, 09:38:36 AM »
anyone know how to wire these up?

Are you going to use the Audi or the older Murcielago switch?

Here is a simple diagram for a DPDT switch:

« Last Edit: October 04, 2013, 09:43:08 AM by autopro »
Pedro

SchulzeA

  • Global Moderator
  • Trade Count: (+15)
  • Hero Member
  • *****
  • Posts: 536
  • Liked: 217
  • Member Rating Points: +33/-1
  • Lambo Mafia
Re: What power window switch are we using for the Murci these days?
« Reply #24 on: October 03, 2013, 10:37:27 PM »
It's really simple to figure out with a multi-meter. I can draw a pin out if needed.

LP640

  • MURCI MAFIA
  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 251
  • Liked: 36
  • Member Rating Points: +5/-0
  • LP640
    • Free Website
Re: What power window switch are we using for the Murci these days?
« Reply #23 on: October 03, 2013, 10:12:13 PM »
anyone know how to wire these up?
Siteupp.com

SchulzeA

  • Global Moderator
  • Trade Count: (+15)
  • Hero Member
  • *****
  • Posts: 536
  • Liked: 217
  • Member Rating Points: +33/-1
  • Lambo Mafia
Re: What power window switch are we using for the Murci these days?
« Reply #22 on: October 03, 2013, 07:11:44 PM »
BTW guys, the pic of the switches Murci-Me posted a while back appear to be from the A4 & A8, as opposed to the A6. The A4 & A8 switches also appear to be the same as those in the later LP640's on.

Edit: It looks like some of the A6 switches may be the same and some aren't. I guess we just have to be careful.
You are correct. They are from the mid to late 90's A4, S4, A6. Here is the part number 4D0959855.

BigPines

  • Trade Count: (+12)
  • Hero Member
  • *****
  • Posts: 1057
  • Liked: 272
  • Member Rating Points: +28/-1
Re: What power window switch are we using for the Murci these days?
« Reply #21 on: October 03, 2013, 03:12:27 PM »
BTW guys, the pic of the switches Murci-Me posted a while back appear to be from the A4 & A8, as opposed to the A6. The A4 & A8 switches also appear to be the same as those in the later LP640's on.

Edit: It looks like some of the A6 switches may be the same and some aren't. I guess we just have to be careful.
« Last Edit: October 03, 2013, 03:27:04 PM by BigPines »
If I don't have time to do it right, when will I have time to do it over?

No Bull

  • Administrator
  • Trade Count: (+25)
  • Hero Member
  • *****
  • Posts: 1108
  • Liked: 299
  • Member Rating Points: +21/-0
  • Replication is the sincerest form of flattery
Re: What power window switch are we using for the Murci these days?
« Reply #20 on: August 30, 2013, 01:05:02 PM »
im lost? lol

Mike is no longer a member on this site.  There are some members here that are keep in touch with him and might be willing to share his email information with you if you'd like to ask him this directly.

Thanks,

Chris

LP640

  • MURCI MAFIA
  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 251
  • Liked: 36
  • Member Rating Points: +5/-0
  • LP640
    • Free Website
Re: What power window switch are we using for the Murci these days?
« Reply #19 on: August 30, 2013, 01:01:39 PM »
im lost? lol
Siteupp.com

usmc_butler

  • Lambo Mafia
  • Administrator
  • Trade Count: (+11)
  • Hero Member
  • *****
  • Posts: 1677
  • Liked: 418
  • Member Rating Points: +33/-0
  • Mafia Productions
    • Lambo Mafia

autopro

  • Lambo Mafia
  • Administrator
  • Trade Count: (+28)
  • Hero Member
  • *****
  • Posts: 1425
  • Liked: 1204
  • Member Rating Points: +43/-1
  • Tijuana/San Diego
Re: What power window switch are we using for the Murci these days?
« Reply #17 on: August 29, 2013, 11:59:26 PM »
Again, he's gone

Welcome back bro!  ::beers
Pedro