NEED HELP "RE-FINDING" THESE SEATS

[76mx]

LP640,
   I do not know if they will fit a G28, I am saying that the Scat seat is the smallest dimensionally that a long search has found and that they have the best chance of any to fit. Compare the dimensions given to your car and see. 
Tallon,
   I have never heard of a fully articulated racing seat and cannot imagine what sanctioning body would allow such a thing, especially covered in flammable material. Are you sure that you are looking at the Sportsman Pro on procarbyscat.com? If so, I am not sure what it is supposed to be similar to, I thought size was the issue here.

[satak44]

As for fitment, they should come in different sizes...The particular one i chose was for a GMC...Im sure they come in several sizes.  Just looking for a manufacturer

[Tallon]

I don't see any similarities in that seat... looks like any other jdm racing seat
unless it's just not showing the seat you're talking about

[LP640]

would they fit in a g28?

[76mx]

Matrix is tunedbymatrix.com and Scat is procarbyscat.com . You want the Sportsman Pro Series. Click the link to dimensions, compare it to others, and you will see what I mean. I am an OEM buyer for Scat and Matrix but the freight kills my ability to sell them and make any profit. Summit has Scat and with their shipping policies you are better off there.

[satak44]

I did not realize that this was a separate thread with the same question when I replied to it over on the build thread. Probably should have done it here instead of stepping on the build thread, my bad and apologies. I just saw the info about Diablo sizes and that is what I was saying about the Scat seats. There are some other series of seats that Matrix has which are a little smaller but still do not fit as well as the Scat seats. Regardless of model of build, like RT said height is critical as well, and most are just too tall as well as too wide. That Scat seat is a good combination of looks, style, and size. Believe me I have spent plenty of hours on this and that is the ONLY viable solution that I have been able to find.

Do you have a link to any of them?

Thanks

[76mx]

I did not realize that this was a separate thread with the same question when I replied to it over on the build thread. Probably should have done it here instead of stepping on the build thread, my bad and apologies. I just saw the info about Diablo sizes and that is what I was saying about the Scat seats. There are some other series of seats that Matrix has which are a little smaller but still do not fit as well as the Scat seats. Regardless of model of build, like RT said height is critical as well, and most are just too tall as well as too wide. That Scat seat is a good combination of looks, style, and size. Believe me I have spent plenty of hours on this and that is the ONLY viable solution that I have been able to find.

[RT]

satak44…
I am building a Diablo.  Those seats would NOT fit.
Those seats are 22" wide, 22" front to back, and 37" high.
The seats can't be much wider than 19".
Front to back at 22" COULD be OK depending on your build.
The 37" high would be into the roof.  Mine are about 33" high.  Think about this: ground clearance = 5".  Top of body = 42".  42" minus 5" ground clearance = 37".  You could not even tilt the seat far enough to make it fit.
Measure first before you buy seats.

RT

[satak44]

http://www.ebay.com/itm/LAMBO-SPORT-BLK-SUEDE-WHITE-STITCH-CAR-RACING-BUCKET-SEAT-SLIDER-L-R-JDM-VEHICLE/400563201613?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D18189%26meid%3D2194255633185210434%26pid%3D100005%26prg%3D8337%26rk%3D5%26rkt%3D5%26sd%3D360768852795%26

I FOUND THESE A FEW MONTHS AGO AND NOW CAN'T FIND THEM ANYWHERE.

ANY ASSISTANCE WOULD BE GREATLY APPRECIATED.